I have had this problem several times with my 2001 Wrangler. I took it in to be checked twice and they found nothing. Each time it happened I realized I had forgotten to put the gas cap back on after a fill up a drove for a while. Last time I ignored it and it went off after another tank of gas. Hope this helps The above doesn't apply to a 1992. The maint. light is different than the check engine light. It is due to computer programming that is set for regular inspection intervals. The light can be turned off with a dealers scan tool.
The Maintenance Required Light is not the same as the Check Engine Light. The Maintenance Required Light is telling you that there is scheduled maintenance that needs to be performed. It may mean it needs an oil/filter change. To find out what needs to be done look at the maintenance schedule in your owner's manual.
The maintenance light,You will need to take it to a Dodge dealer to reset it. Or get a DBR-2 code scanner.BIG $$$
I changed the battery and voila' - no more light.
The maintenance required light requires a scan tool to be reset.
It is a reminder to do preventative maintenance. It comes on after a required number of mules. Does not mean that there is a problem wirh the vehicle. You can use a key to push in the slots to reset to green.
There is a small black slot on the left of the guage cluster. Put your car key in there, it should reset the light!
Sorry, your question is not very clear; not sure what you need?
A computer from a 1992 Wrangler with the same engine is what is compatible.
Did you check the light bulbs? If OK, probably a bad reverse light switch in tranny.
They didn't make a 1996 Wrangler...
no
No.