Undercutting is a defect that appearsas a groove in the parent metal directly a;ong the edges of the weld it is most common in lap fillet welds, but can also be encountered in fillet and butt joints. This type of defect is most commonly caused by improper welding parameters, particularly the travel speed and arc voltage
Tagalog Translation of WELDING: sugpong
TW = thermite welding, a welding process that requires no external source of heat or current.
MTR in welding?
EFW: Electric Fusion Welding is a more general term which includes Electric resistance welding (ERW) and other types of welding such as Arc welding.
The 'welding sparks' that come off during welding are metal particles from the filler metal, electrode, or base metal that are lost during welding. The standard term is spatter.
Undercut - film - was created in 2004.
Arc welding uses an electrical current to create enough heat to melt metal. Any type of welding that uses an electric arc is technically arc welding. However, most people use the term 'arc welding' to mean shielded metal arc welding (SMAW), or 'stick welding'. SMAW, MIG, and flux core wire welding use the filler metal as both electrode and filler; TIG welding uses an electric arc to heat the base metal and a separate filler rod to add metal to the weld.
You can find pretty much all welding defects in Mig welding. There are some that are morelikely to appear than others but that is depending on the gas and power range that is being applied. The defects are: porosity, incomplete penetration (mostly in case of short circuit transfer) undercut, excessive concavity/convexity (incorrect amperage/voltage ratio), cracks (cold and hot) incomplete fusion (wrong torch angles), cold lap.
You may be refering to the term SOLDER. If so it is used when soldering NOT welding.
Undercut meat is the Tenderloin of beef; the fillet.following image shows the position of tenderloin of beefhttp://sacchef.files.wordpress.com/2010/08/beefcuttenderloin.pngfor more details, search for Tenderloin on google
The duration of Undercut - film - is 2040.0 seconds.
it means welding inspector exam details