It applies pressure to the brake pads.
Wheel cylinder stops would keep the wheel cylinder from coming apart.
Brake wheel cylinder or axle sealBrake wheel cylinder or axle seal
take the brake line out of the back of the wheel cylinder, pull the brake pads off and then take the 2 bolts out of the back of the cylinder and pull the wheel cylinder out.
Rear wheel? Remove wheel Remove brake drum Loosen and remove brake line to wheel cylinder Remove mounting bolts at rear of wheel cylinder Pry brake shoes back from wheel cylinder Pull wheel cylinder off backing plate Install in reverse procedure Bleed affected brake line
take tire off, pull brake shoes off, and on the backing plate in the back of it you will see 2 bolts that hold the wheel cylinder on, take the brake line out of the wheel cylinder and remove the 2 bolts and the wheel cylinder is off.
A wheel cylinder describes "Drum Brakes" - Drum brakes have one cylinder with two diametrically opposed pistons.
take the brake line out of it and there are 2 bolts on the back of the wheel cylinder that come out and it's off.
4 cylinder or 6 cylinder, 4 wheel drive or 2 wheel drive, need to know what you have cause they are all different. It is a 4 wheel drive, 6 cylinder.
No.
Which item is not a component of the breaking system? Master cylinder, break hose, orifice tube, wheel cylinder
what tools do i need to remove the wheel cylinder on a 1993 pontiac bonneville
Jack up the vehicle, chock a wheel.. you may or may not need to remove the rim and tire to get to the wheel cylinder. Disconnect the brake fluid line, then remove the two bolts holding the wheel cylinder on. It'll come off at this point.