0
What driving cycle is required for computer to be ready to read after check engine light is reset in 1996 Saab 900 SE?
Wiki User
∙ 14y ago
mine was around 100 miles
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Egr code 32 check engine light comes on while driving 2.2 manuel trans no ground at solonoid for egr replaced computer prolbem still there?
Check the wire form the solenoid to the computer.
Why does the check engine light come on after driving a few miles in a 1994 dodge 1500?
The computer is detecting a malfunction. you need to have it checked for codes
Your 95 dodge neon stop running while you were driving with no warning just the check engine light came on the it stop?
You need to find out what the check engine light came on for. Have the computer scanned for codes. When certain errors occur that could damage the engine, sometimes the computer will just shut down the engine to prevent damage. That may be what happened to you.
Why would a check engine light go off by itself?
The problem has gone away and the computer has passed the required tests enough times.
Why does the check engine light remain on after driving through water?
You will need to have a technician scan the computer for codes. It is very possible that you have an oxygen sensor problem.
Why does the Check engine light comes on after starting and then goes off after driving?
The check engine light ALWAYS means that the computer has detected a "fault". Rather than have a special light for every conceivable problem that might EVER come up with your engine, the check engine light is supposed to warn you to read the codes that the computer has detected. Even if the light goes off there should be a "stored code", meaning that there should still be something in the computer. If not, have the codes checked when the engine is cold, see what you can find.
Is the engine check light supposed to turn on after changing radiator?
No, the check engine light comes on when the computer detects a malfunction and sets a code.No, the check engine light comes on when the computer detects a malfunction and sets a code.
Why does your check engine light stay on with no computer?
Because you removed the computer.
How do you reset the check engine light after an oil change on a 2002 Toyota Solara?
Check engine light has nothing to do with oil change. The check engine light staying on indicates the computer has detected a problem that is effecting the emissions controls. Now if you are referring to the maintenance required light, open the owner's manual and read it.
What turns on the check engine light?
The engine computer turns it on at start up for a bulb check. If it stays on the computer has detected a malfunction and set a code.
Would replacing an exhaust cause the check engine light to come on?
Maybe, the check engine light comes on when the computer detects a malfunction and sets a code.Maybe, the check engine light comes on when the computer detects a malfunction and sets a code.
How does one check engine light codes?
To check engine light codes one would have to bring your vehicle to a mechanic who can use a computer to check the computer chip that regulates this function.
