wont fire, timing off, backfiring
Unfortunately not: The 07 Sporties are EFI (fuel injected), thus requiring o2 sensors (and sensor bungholes) in the exhaust. 06 bikes, on the other hand are use a cv carb that does not need the sensors or bungs.
On 98-03, it is integrated with the cam position sensor inside the nose cone on the right hand side of the engine.
On the tranny.
The speed sensor is mounted on the right side of the transmission case below the starter.
i have a 1995 harley e- glide , recently the speedo quit i dont know if its electric or man how do i go about fixing i have a 1993 sportster with the same problem.....replace the speedo cable, it's a piece of cake and costs maybe 40 bucks. Ehmm...an electra-glide does not have a spedoocable like the sportster...check the cables behind the dials, or on the other end by the speed sensor.
a 95 harley does not use a digital speedometer. If urs has one, it is probably aftermarket modificiation.
on top, right side of trans
on the bike somewhere
It's under the seat and bolted to the rear fender.
top right side of the transmission, toward the rear.
It should be on top of, or near the transmission. Mine is an '07 and it is located just to the right of where the battery ground connects to the case.
If you don't have a speedo cable on your front wheel, you have a speedo sensor. I believe that change was made in 2000.