A stereo is a simpler version of today's home audio system or a Home Theater system. In the past, a stereo was unified audio component (box) that did everything starting with receiving and tuning the AM, FM, etc. signals, to finally outputting them to connected speakers.
The basics of a "stereo" system is that it takes electromagnetic power (current, either AC or DC) to power itself and its internal amplifiers and tuners. The tuner that's selected (AM, FM, etc) then takes any electromagnetic energy (radio waves) collected by the antenna, and both tunes (selects) a specific frequency band and amplifies that band. At this point, the electromagnetic energy (radio waves) have been converted to another form of electromagnetic energy (current).
This current (tuned frequency signal) is IF-subtracted / demodulated, and eventually converted to another current representing an amplitude-significant signal. This AM signal (current) is fed to another amplifier, and then piped to the speaker(s).
The speakers convert the electromagnetic energy (current) that's fed to them into mechanical energy that pushes on the speaker's surfaces. The speaker converts this mechanical energy (motion) into audio distortions in the air/atmosphere which we call sound (pressure).
So, conversions are:
electromagnetic energy (radio waves)
\/
electromagnetic energy (current)
\/
mechanical energy (speaker motion)
\/
mechanical energy (air pressure)
\/
MMMUUUUSSSSIIIIIICCCCCC!!!!!!!!!
A stereo is a simpler version of today's home audio system or a Home Theater system. In the past, a stereo was unified audio component (box) that did everything starting with receiving and tuning the AM, FM, etc. signals, to finally outputting them to connected speakers.
The basics of a "stereo" system is that it takes electromagnetic power (current, either AC or DC) to power itself and its internal amplifiers and tuners. The tuner that's selected (AM, FM, etc) then takes any electromagnetic energy (radio waves) collected by the antenna, and both tunes (selects) a specific frequency band and amplifies that band. At this point, the electromagnetic energy (radio waves) have been converted to another form of electromagnetic energy (current).
This current (tuned frequency signal) is IF-subtracted / demodulated, and eventually converted to another current representing an amplitude-significant signal. This AM signal (current) is fed to another amplifier, and then piped to the speaker(s).
The speakers convert the electromagnetic energy (current) that's fed to them into mechanical energy that pushes on the speaker's surfaces. The speaker converts this mechanical energy (motion) into audio distortions in the air/atmosphere which we call sound (pressure).
So, conversions are:
electromagnetic energy (radio waves)
\/
electromagnetic energy (current)
\/
mechanical energy (speaker motion)
\/
mechanical energy (air pressure)
\/
MMMUUUUSSSSIIIIIICCCCCC!!!!!!!!!
Application
The transformation of energy take place in hydropower plant includes:Potential energy -> kinetic energy-> electrical energy
A form of energy can't 'take place'. An energy changetakes place, in this case from electrical energy to light.
The amount of energy a reaction needs to take place is called activation energy. When this much energy is present, a chemical reaction can occur.
Replacing a car stereo is not a difficult process. All you need to do is take off the face plate, unscrew the radio, and unhook the wires. Then place the new stereo in, hook up the wires, screw the new stereo in, and replace the face plate.
Everything Needs energy to take place. Biologically you should specify your question down to an area
The type of energy transfer that can take place with little or no matter present is radiation.
A conversation between two or more people in a book, movie or play is called 'dialogue.' A dialogue can also be a verb meaning to take place in a conversation to resolve a problem.
Electrical energy -> heat energy
What energy transformations take place in:
Every item on this planet earth contains energy. Energy, in a way, is the source of our existence. It takes place from one place to the other.
Kinetic Energy takes place, due to the fact you apply energy to the scissors.