If it's a new laptop then it will be able to pick up wifi without any additional equipment. Look on your laptop for a switch that can turn on and off wifi capabilities. The switch is sometimes in the side or bottom of the laptop. If there is no switch you can also go to internet options and look for "enable wireless connections".
No
pick is a measuring
Probably not. You need to turn on the wireless transmitter and search for available networks. Hopefully this should pick and indentify the BT home hub.
To set up a wireless internet connection, you'll need a high speed modem and a wireless router. Laptop users will need a wireless card to pick up the signal, and desktop users need a PCI card. Check out www.bestbuy.com to buy any of these parts.
If your laptop is quite old then you need the driver for the LCD to be installed onto your laptop so that the laptop can communicate with the LCD monitor. If you laptop is a later model then there shouldn't be a problem coz the drive would already be in the windows application. Or, if you have evrything connected when your laptop was on then you must restart your laptop so the laptop can reset and pick up the signal from the LCD. Assume you have the correct monitor cable (15 pins) then in the help and support window type in 'add hardware' then select 'using add hardware' and follow the instructions there.
you will need an Iron pick axe, stone or wooden pick axes do not work.
First thing you will need is a microphone to pick up the music, then signal processing circuits to convert the microphone signal to a drive signal for the LED or LEDs.
You don't really need equipment to skate good. You just have to practice. Equipment is for safety.
You need to buy a wireless router. Whether it be an internal or external, you need that to pick up the signal to your base or home network. Then if you don't already have WiFi built into your laptop, you also need that too. You can buy that also to plug into a USB port on the laptop.
You get unusable signal on your TV because your TV is not on the correct input setting to pick up the signal from your device (DISH Network or other provider). You only need to change the input setting to find the correct input to get the signal.
i got my enternal cable connected to my ps3 to my laptop but still the ps3 dose not pick up the online
I'm not a an expert by any means, but I did work for an ISP for a few years working customer service. When you purchase the laptop make sure it has a wireless card. (If you are getting a MAC, I really don't know.) If you already have some sort of highspeed internet access you'll need to have at least a 1.5Mbps connection speed to really appreciate a wireless connection. You'll also want to find out if your current equipment broadcasts a wireless signal. You should be able to call your ISP and ask them. If the router/modem does not broadcast a signal you'll want to either purchase an adapter at like Bestbuy or Walmart, if your devise is new enough. If you have an older devise you should just purchase a new piece of equipment that does broadcast a wireless signal. Once again contact your ISP, you'll want to make sure your new modem/router is still compatible and supported by your ISP. I always say less equipment is better, if there's ever an issue later it's easier to eliminate the problem if you only have one piece of equipment. Once you have a wireless signal broadcasted in the home your computer should pick up the signal and ask for some information. I would recommend contacting your ISP or the support department for your router if you need additional assistance configuring the wireless connection. If you do not have an ISP, just pick one out and let them know your needs. I always suggest sticking to someone with local free support. Never go with an ISP that isn't willing to sit on the phone and answer all of your questions, regrdless of how simple you may think they are OR how many times you ask them.