Duration is the amount of time the valves are open measured in crankshaft degrees.
.050 duration is another way of measuring the amount of time the valves are open -- measuring it starting from the point where the lifter has moved .050 from closed position and continuing until the lifter returns to .050 from the closed position.
Cam Jansen books are typically written in third person point of view. The narrator follows Cam Jansen as she solves mysteries, but refers to her as "Cam" or "she" rather than "I."
The cam is the heart of the engine. If the cylinder heads can flow up to the valve lift, the duration controls where the power is made/and too a smaller part the lift control how much power is made in that powerband. AN old school rule of thumb is 10 degrees is equal to 500 rpm bump in powerband.
The cam duration is the degrees of crankshaft rotation that the valve is lifted of it's seat. Most accurate way to compare cams is with duration at .050 inch lift. How many degrees from when the valve is .050 off opening to when the valve is off the seat .050 during closing.
There is no word or character for 'cam' in Chinese.
Because the geographical poles and the magnetic poles are not in the same place. A detailed explanation cam be found in the link to Wikipedia.
CAM - Common Area Maintenance or CAM - Certified Administrative Manager
It means the s-cam rotated too far and got stuck at a point where it won't return to neutral. This typically leaves that brake applied, and you typically notice it when your brakes are smoking/catch fire.
field
Point the intake cam lobe down and the timing mark on the cam gear at the 12 o clock position with the piston at TDC.
Computer Aided Manufacturing
Cam lift and duration is how wide the cam opens the valve, and how long the valve stays open. The longer the valve is open, the more air\fuel mixture can get into the cylinder. More fuel means more power.
SOHC--Single OverHead Cam DOHC -- Dual OverHead Cam