the factors that effect are ,temp,volts,amperes,lentzs law governing electic,which is very common to volkmans law,,,,which is called back flux resistance +resistance of the conductor
The strength of an electric field is influenced by two factors: the magnitude of the charge creating the field, and the distance from the charge at which the field is being measured. The larger the charge and the closer the distance, the stronger the electric field will be.
Three appliances that use the heating effect of electric circuits are electric stoves, electric heaters, and toaster ovens. These appliances utilize the electrical resistance in a circuit to generate heat for cooking or warming purposes.
The force on capacitor plates in an electric circuit causes them to store electrical energy by creating an electric field between the plates. This results in the accumulation of electric charge on the plates, which can be released to power devices in the circuit.
Turn on all the electric divices in a circuit!
Mass as well as distance.
If the copper rod is connected into the electric circuit in place of a piece of wire, it would have no effect at all on DC or low-frequency circuits. But the box used to hold the circuit would probably need to be bigger, because copper rods normally come in 6-foot lengths.
There are three effects produced by an electric current:heating effectmagnetic effectchemical effect
In Columbus' Law, the separation distance affects the electric force inversely: as the distance between charges increases, the electric force decreases. This relationship is described by the inverse square law, which means that the force decreases exponentially as the distance increases.
There are three effects produced by an electric current:heating effectmagnetic effectchemical effect
It doesn't necessarily have a 'function'; it is simply the natural consequence of applying a potential difference across a conductor. However, this is usually done for a reason, and its function is then derived from one or other of the three effects of that current:heating effect -e.g. electric heatersmagnetic effect -e.g. electric motorschemical effect -e.g. electrolysis (electroplating)
Electric kettles have a high power rating, which means they draw a significant amount of current from the electrical circuit when in use. When the kettle is plugged in and turned on, it creates a heavy load on the circuit, causing an increase in current flow to the kettle to provide the necessary energy for heating the water.
When the electrical appliances are not connected well or the cables of the electric appliances are worn out,a short circuit may occured. A short circuit affects the normal operation of electrical appliances connected to the circuit.It has very low resistance that almost all electric current would flow through it.Owing to the heating effect,an excess electric current would produce heat and thus may damage the electric appliances,or even cause a fire,if without a fuse or a circuit breaker.