ya there is
oem is 75.6mm 14 flutes but 76mm wrench also fit it.
Next to the oil pan. I recommend using an oil filter socket wrench attachment to remove the filter. A regular filter wrench will not fit and its difficult to loosen by hand.
No. 2008 highlander has a aluminum filter housing you need to remove with a special type of filter wrench. I was able to tap mine loose without a wrench but it could be at 24n-m tight which is difficult to loosen.
You can usually buy an oil filter wrench from any auto parts store's that would fit your oil filter
They are normally just hand tight. If you can't budge it you can get a filter wrench at a auto parts store that will fit it.
Just a socket wrench that will fit on the lid for the filter because it is a an actual filter cannister not the usual steel filter
It uses a cartridge type filter. You can buy a wrench that will fit the cartridge, but a large channel lock wrench will accomplish the task, unless you over-tighten. Remember to remove the filter drain plug, before removing the filter. Be sure and replace the O ring on both the drain plug an the filter.
a wrench with a metal band that wraps around oil filter that ables you to turn aka an oil filter wrench
Why would you want to know the size of the thread on the oil filter? All spin on filters have rolled threads and as long as you buy a filter that is made for your car it will fit. You don't need a wrench to fit the threads just spin the filter on and off.
any oil filter wrench - it warps around the filter and you can adjust it - the wrench looks like a giant ring
In order to remove the oil filter from a 2007 Toyota RAV4 you need to use an oil filter wrench. This wrench is a specialty to Toyota.