0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is a RF amplifier?
A RF amplifier is a device for electrically amplifying the power of an electrical signal, typically, but not exclusively, radio frequency signals.
Tell you what an intermediate frequency amplifier do?
The intermediate frequency (IF) amplifier lies between the mixer and the demodulator. The mixer shifts the input radio frequency (RF) signal into the range of the IF amplifier. The IF amplifer is a band pass amplifier, so only RF signals that are the IF frequency distance away from the local oscillator in the mixer can pass through to the demodulator. This process is called the superhetrodyne process.
What are the principles of mixing in electronic communications?
In receivers the received RF signal is mixed with the signal of a local oscillator of a different frequency and the intermediate frequency is then amplified by the IF stages normally 3 that resonate slightly off beat to filter out all harmonics and is then detected by the detector stage where all RF is filtered down to ground and only pure audio is then amplified In receivers the received RF signal is mixed with the signal of a local oscillator of a different frequency and the intermediate frequency is then amplified by the IF stages normally 3 that resonate slightly off beat to filter out all harmonics and is then detected by the detector stage where all RF is filtered down to ground and only pure audio is then amplified
Can laser beam be used as RF signal carrier?
When modulated with a radio frequency signal, they will indeed carry information. As in fibre-optic cables. The modulation may be of the several commonly used types, amplitude, frequency, phase ... modulation.
What do you mean rf cable?
RF = Radio Frequency
Difference between IF and RF signal?
RF signal is coming from an antenna. So it contains electromagnetic waves. But when the signal is processed using electronics circuits, the range of frequency may not be sufficient. So that RF has to be convert to some other frequency acceptable by the circuit. And IF is the intermediate frequency used for tuning & other purpose.
The of an antenna depends upon the frequency of the RF signal and the gain?
The size of an antenna depends upon the frequecny of the RF signal and the gain.
Difference between RF microwave?
RF means radio frequency or relativity low range of frequency microwaves however are into the top range of the spectrum or very hi frequency.
What are the differences between analog and RF circuits?
analog circuit is circuit that generates audio, sound, radio etc (waves of the natural world) RF stand for radio frequency, it is often refer to the property of signal transmission in high frequency (HF). If you say a circuit is RF, the circuit would be in the frequency range between 3kHz to 300GHz. The reason that RF circuit is special is because the performance of signals of higher frequency is different to other lower frequency AC circuits. When designing a RF circuit, RF engineers have to consider the type of wires, lengths, use of components, signal loss etc. It is because high frequency signals would take a piece of wire (longer than 1/10 of signal wavelength) as wires with many inductors and capacitors.
What is range of rf transmitter and receiver?
depends on frequency and power
What occurs whenever a reflected RF signal combines with the main signal?
It produces a high SWR (standing wave ratio) that limits the maximum RF (radio frequency) output.
What is a RF amplifier?
A RF amplifier is a device for electrically amplifying the power of an electrical signal, typically, but not exclusively, radio frequency signals.
Tell you what an intermediate frequency amplifier do?
The intermediate frequency (IF) amplifier lies between the mixer and the demodulator. The mixer shifts the input radio frequency (RF) signal into the range of the IF amplifier. The IF amplifer is a band pass amplifier, so only RF signals that are the IF frequency distance away from the local oscillator in the mixer can pass through to the demodulator. This process is called the superhetrodyne process.
What is the full form of RF in space technology?
RF- Radio Frequency, which is in the measure of kilo & mega Hz range
How does frequency modulation work?
Frequency modulation (FM) works by taking a signal, such as an audio signal, and using it to modulate a higher frequency (Radio Frequency, RF) carrier. This modulation causes the RF to shift up and down in frequency. The RF remains relatively constant in amplitude, and its shifting frequency represents the original signal.Contrast this with Amplitude Modulation (AM) where the RF is relatively constant in frequency, but its amplitude represents the original signal.In order to recover the original signal in an FM system, the receiver must demodulate the signal by measuring the time between successive waves of the RF. In a typical broadcast band system, limitations in the the design requirements for tuning the modulated carrier and for demodulating the original signal force the tuning and demodulation to be done in different stages. Using a process known as superhetrodyning, the tuner amplifies the RF with a broad-band amplifier and mixes the RF with a local oscillator (LO) frequency, converting the RF into an intermediate frequency (IF), typically 10.7 MHz. It then passes the still modulated IF (or shifted RF) into a sharp band-pass filter, the IF stage, and removes the interference of other stations from the IF signal. It then demodulates the original signal from the IF signal.Often, the original signal contains encoded information, such as a stereo subcarrier, which is subsequently demodulated and demultiplexed in order to recover the stereo signal. The question, however, asked about frequency modulation, so the answer stops here. If further detail is required, either add it by refining the answer, or comment on the question, and I or someone will refine the answer.
What is resonating frequency?
It is a the RF output of a transmitter that is tuned to a distanced receiver, it have to be in resonance with the transmitter signal to be able to receive the signal
What is the radio frequency range?
freq range of rf is 3hz (extremely low frequency) to 300Ghz (extremely high frequency)
