The interface between the physical layer and the network link layer.
Briefly discuss the functions of transport layer.
presentation layer
Data Link Layer
Detect and accept signals -Pass on to Data Link layer -Set data transmission rate -Monitor data error rates
Primary functions provided by Layer 2 data encapsulation include data link layer addressing, and the detection of errors via cyclic redundancy check calculations. An additional function is delimiting groups of bits into frames.
Yes, True
What are two functions of the data link layer? (Choose two.) It segments and reorders the data. It exchanges data between programs that are running on the source and destination hosts. ***It controls how data is placed onto the media. It generates signals to represent the bits in each frame. ***It encapsulates each packet with a header and a trailer to transfer it across the local media. ============================ 1. Data Link layer do not reorder data - this is the job of Transport Layer 2. Programs are at Aplication Layer 4. Physical Layer generate signals
Middle layer of osi model is Transport layer functions: 1.Segmentation of data 2.connection managment 3.flow control of data 4.Error checking
Data link layer transforms the physical layer and makes it appear error free. Data link layer is responsible for physical addressing. It has some other functions like error control, flow control and access control.
physical & data link layers
Definition of Hardware Specifications: The details of operation of cables, connectors, wireless radio transceivers, network interface cards and other hardware devices are generally a function of the physical layer (although also partially the data link layer; see below).Encoding and Signaling: The physical layer is responsible for various encoding and signaling functions that transform the data from bits that reside within a computer or other device into signals that can be sent over the network.Data Transmission and Reception: After encoding the data appropriately, the physical layer actually transmits the data, and of course, receives it. Note that this applies equally to wired and wireless networks, even if there is no tangible cable in a wireless network!Topology and Physical Network Design: The physical layer is also considered the domain of many hardware-related network design issues, such as LAN and WAN topology.
Switches are commonly known as "Layer 2 (Data Link Layer)".3550 Switches: These switches are working under Layer 2 (Data Link Layer) and it is forward the packets through MAC Address, but if we convert these type of switches into Routers it will function in Layer 3 (Network Layer) of OSI model as it's forward the packets based on the IP addresses.2950 Switches: These switches are working under Layer 2 (Data Link Layer) of OSI model only and it is forward the packets through MAC Address.