Which of the following needles has the widest lumen?
According to my Chemistry teacher its physical
Physical chemistry Analytical chemistry Organic chemistry Inorganic chemistry Materials chemistry
It plates the needle
language is different, filipino chemistry is chemistry of filipine, foreign chemistry is chemistry of that country
Depends how it is drawn- Butterfly or straight stick 19 g and 21 G are the normal straight stick. If you use a buterfly to draw the lab then they are ususally 21 or 23 Gauge. (Remember the bigger the gauge number the smaller the needle width). The smaller the needle width the higher the chance of hemolization (cell squishing)
Depends how it is drawn- Butterfly or straight stick 19 g and 21 G are the normal straight stick. If you use a buterfly to draw the lab then they are ususally 21 or 23 Gauge. (Remember the bigger the gauge number the smaller the needle width). The smaller the needle width the higher the chance of hemolization (cell squishing)
the gauge is the measurement of how big around the stud or needle is
The 21 gauge is a smaller needle.
Gauge is the term that indicates the diameter of the needle. Most commonly the needles that are used for medical purposed range from 7 Gauge to 33 Gauge, according to the Stubs scale. 7 Gauge needle will have the largest diameter while as the number increase, the diameter decreases. Therefore the 33 Gauge needle has the smallest diameter. So a 26 Gauge needle will have a smaller diameter than that of the 18 Gauge needle.
Yes, the larger the gauge the smaller the needle size.
Yes, a 30 gauge needle would be tiny, while an 8 guage needle is huge.
No
A round gauge with a needle to point at the measure.
Yes it is smaller in terms of diameter. Explanation: 25 gauge refers to a needle having an inner diameter of 1/25" (1/25 inches) and 22 gauge refers to a needle having an inner diameter of 1/22" (1/22 inches). Thus the 25 gauge needle has a smaller inner diameter than a 22 gauge needle.
Mine was done with a 16g needle (:
Defective temperature sensor or bad gauge