3.73
yes, but not if 4wd
more than likely it's a 3.08 gear in the rearend.
Jeep Wrangler only,
Do you mean gear ratio or rearend size?
Open the cover, count the teeth on the big gear ( the ring gear ) next count the teeth on the small gear ( the pinion gear). Divide the big gear by the little gear and that is your ratio.
85W90 gear oil.
Overdrive is a gear in your transmission that allows you to save gas and lower engine rpm by changing the net gearing to a higher, more gas effiecient ratio. Typically it is higher than 1 to 1 which is usually the top gear. This makes it like you had a higher ratio rearend gear installed also allowing a higher top speed at a slower acceleration curve. Consider it an economy gear ratio.
yes it does come with a 12 bolt 8.5" rearend but im not 100% sure on it But i beleve it does come with a 3.73 ratio the only real way to find out is to turn the driveline and count the turns until the tire rotates once
The easiest way is to write down the VIN # and then call a Chevy parts dealer and tell him you would like to know the gear ratio in your 2008 truck. And that you have the VIN #. He'll take care of you.
1gnek13t63j210068
if you let me know what the 4:11 came out of I could help the 4:11 just means the gear ratio not what it will fit if you are asking can you put a set of 4:11 gears in your stock rearend the answer is yes as long as you get them for that rearend hope this helps
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.