Want this question answered?
no
It would not be immediately dangerous but there is a possibility of overheating with the 9% overvoltage so it isn't a good idea unless the motor is lightly loaded and watched very carefully. The safe voltage range should be marked on the motor.
It would probably spin, but I don't know if it'd last very long. First, the speed of AC motors typically are dependent on the frequency ( 50 Hz or 60 Hz) so the motor would be trying to spin 20% faster than designed. Also, because of the higher voltage, you would have more current running through the motor windings (wiring) than designed. These 2 conditions would cause overheating of the bearings as well as the wiring inside the motor.
Your stereo system has an internal transformer in the power supply that is designed to operate at a given frequency. If it is designed to operate at the load your stereo system will use at 50 Hz, then yes. Otherwise this transformer will overheat when connected at the wrong frequency, and will burn out. You might be lucky and the power supply may be labelled to operate at 50 or 60Hz; if not, I recommend contacting the manufacturer. A voltage transformer will convert 50Hz 220 to 50Hz 110. To change frequency, you need special equipment.
Yes. It will make your motor a little faster though, so it depends on what you are powering with this motor. IE Can the piece of eguipment be ran faster?
no
In India its 415V, 50Hz.
The fan will physically get warmer and the blade speed will increase.
It would not be immediately dangerous but there is a possibility of overheating with the 9% overvoltage so it isn't a good idea unless the motor is lightly loaded and watched very carefully. The safe voltage range should be marked on the motor.
The internal working of the motor is designed for 110V/60Hz. Your stepdown converter is from 220V/50Hz to 110V/50Hz. Frequency converters from 50Hz to 60Hz are very expensive (many times the cost of a new clipper). Therefore it is better you get a clipper designed for 220V/50Hz. If you still like to put your clipper to use, then the most cost effective solution would be to get a "car inverter" that would convert 12V DC to 110V/60Hz AC.
It would probably spin, but I don't know if it'd last very long. First, the speed of AC motors typically are dependent on the frequency ( 50 Hz or 60 Hz) so the motor would be trying to spin 20% faster than designed. Also, because of the higher voltage, you would have more current running through the motor windings (wiring) than designed. These 2 conditions would cause overheating of the bearings as well as the wiring inside the motor.
3-50hz mean = -47
This seems like a question from an electrical course, and is probably best answered by referring to your course materials. It's your test question, not ours, and there won't always be someone else to ask for the answer. Earn your diploma.
There should be no problem at all.
The mains supply in Scotland is 50Hz.
Your stereo system has an internal transformer in the power supply that is designed to operate at a given frequency. If it is designed to operate at the load your stereo system will use at 50 Hz, then yes. Otherwise this transformer will overheat when connected at the wrong frequency, and will burn out. You might be lucky and the power supply may be labelled to operate at 50 or 60Hz; if not, I recommend contacting the manufacturer. A voltage transformer will convert 50Hz 220 to 50Hz 110. To change frequency, you need special equipment.
Yes. It will make your motor a little faster though, so it depends on what you are powering with this motor. IE Can the piece of eguipment be ran faster?