0
Add your answer:
Earn +20 pts
What is peak voltage value of 3 phase?
The same as in single phase with the same RMS voltage.
Does kva equal voltage x current x 1.73 for a 3 phase generator?
Yes, but only for balanced loads (current in all three phases the same value). The voltage value used is the phase to phase voltage.
What is the 11kv phase to earth voltage?
6350.8 volts AC rms. The phase to earth voltage is ( square root(3) ) x lower than the phase-phase voltage on a 3 phase system.
Why 1.732 value is include in three phase calculations?
It is the square root of 3. Multiply 1.732 to 120v. and you get 208. which, on a three phase system, is the voltage from line to ground.
Why phase angle is zero when voltage and current are in phase?
1 & 3
What is peak voltage value of 3 phase?
The same as in single phase with the same RMS voltage.
Three phase voltage in india?
It is 230V single phase and 440V in 3 phase system at 50 Hz.AnswerIf the single-phase voltage is 230 V, then the three-phase voltage must be 400 V, not 440 V. The line voltage is 1.732 times the phase voltage.
Does kva equal voltage x current x 1.73 for a 3 phase generator?
Yes, but only for balanced loads (current in all three phases the same value). The voltage value used is the phase to phase voltage.
Why do you have voltage to ground but not voltage phase to phase?
There is phase to phase voltage in 3 phase system.AnswerYou don't get voltage 'phase-to-phase'; it's 'line-to-line'!
In a 3 phase full converter the output voltage during overlap is equal to?
Average value of the conducting phase voltages
What is 3 phase voltage in Germany?
Three-phase voltage in Germany is 400V, single-phase voltage is 230V.
What is the 11kv phase to earth voltage?
6350.8 volts AC rms. The phase to earth voltage is ( square root(3) ) x lower than the phase-phase voltage on a 3 phase system.
What is 3 phase voltage in Iran?
The three phase voltage is 380 the hertz is 50
What is called an effective voltage in Alternating current and if you mention 115 V ac 3 phase means peak voltage is 115 or it is an effective voltage?
115 is the RMS voltage. The actual voltage is a sine wave from -167 to +167 relative to ground. RMS stands for root-mean-square, and it a way of saying that 155 Volts of DC would do the same work on the same sized load. There can be up to 3 phases, and they are the sine wave, shifted by a part of the curve. In most houses, there are 2 phases, and the voltage to ground for each is 110 to 120 V RMS. The voltage between the 2 is 230-240VRMS. 3 phase gets very complex. Each phase is 115 to ground or neutral. 3 PHASE 115V AC EACH PHASE IS 120 DEGRES PHASE SHIFTED THE EFFECTIVE VALUE IS .639 X 115 THE PEAK VALUE OF PHASE IS 1.41X RMS VALUE.
In a 3 phase 480 panel what voltage should you get phase to phase?
The voltage you are referring to is a 'line-to-line' voltage ('line voltage'), as there is no such thing as a 'phase-to-phase' voltage.480 volts. In real life, the voltage will vary slightly by up to 3% (14 V) on a properly sized circuit. Line to neutral will measure 277 volts, plus or minus 3%.
If in the three phase connection phase to phase voltage is 400v what will be the phase neutral voltage?
The formula to use is, phase voltage /1.73 = phase to neutral (ground) voltage.CommentThere is no such thing as a 'phase to phase', or 'phase to neutral' voltage. The correct terms are 'line to line' and 'line to neutral'. So the above answer should read: line voltage/1.73= line to neutral voltage = phase voltage.
How do you convert line current to phase current?
The current is the same in the three live wires. The voltage can be described as the line voltage (phase to neutral) or the phase voltage (phase to phase) which is larger by a factor of sqrt(3). So a line voltage of 230 v corresponds to a phase voltage of 400 v.
