Want this question answered?
There are two forms of sewing that use the name patchwork. The most common one is repairing tears in fabric by sewing a new piece of fabric over the tear. The other is called patchwork quilting, and it is done sewing various pieces of fabric together to form a large piece of fabric to make a finished product.
Tear-Stained Letter was created in 1983.
longitudinal axis: An axis along the lengthwise direction of the figure or body, usually passing through its center of gravity.
Fabric
Tear ducts leak water, bodies are 90% water, water excreted is salty, the brain sends a message to the tear ducts when you are sad and the tear ducts clean themselves by releasing the fluids
The warp of the fabric means the lengthwise threads in the fabric. The weft is the horizontal weavers of the fabric.
A grain of fabric refers to the direction of the threads in the fabric. Fabrics have three grains: lengthwise grain (parallel to the selvage edge), crosswise grain (perpendicular to the selvage edge), and bias grain (45-degree angle to the lengthwise or crosswise grain). Each grain behaves differently when fabric is cut or manipulated.
stitch and tear is a type of fabric structure used in textiles.
stitch n tear is a fabric used for applique
replace it
Azrael's Tear happened in 1996.
Tear-resistant?
The advantages of denim is Its strong and easy to clean.
Tear Ring Saga happened in 2001.
lengthwise, lengthways
The tensile strength of textile can be divided into three types: as for the woven fabric, one is tensile strength, most of fabric can reach this demand, if not, the development of this fabric is unsuccessful, can not be used to make clothing. The second is tear strength, tear the sample a hole first, then use the strength tester to tear the sample and test its sustainable strength, this is a key index and has much more substance. As for the knitted fabric, the index to check the fabric strength is bursting strength. The most relevant to the knitted fabric bursting strength are the yarn strength and fabric weight, if the fabric yarn strength is poor and the fabric weight is light, there will cause problems. The yarn fineness: as for the same material, the thicker the yarn, the better strength, so this fabric strength is higher. The yarn twist: in general, the yarn strength increase with twist, after reaching certain extent, the yarn strength decrease with twist, but it won't happen in general. The fabric density: generally speaking, the higher the fabric density, the more yarn dosage per unit area, so that the fabric strength is bigger. By YULONG FR tex
The fabric for garments is cut in a way that will create the best lay when constructed. Fabric tends to stretch along the grain, which is why abutting seams are typically both cut along the grain.