If the power button is steady/solid red and no other buttons are lit, this indicates it's a power related issue. We recommend trying another outlet or power strip. Often, the machine is getting enough power to turn on the lights but not enough to fully run the machine.
You hold down the power button for 4 seconds, until the light on the power button turns red.
Its the button that turns the comkputer on.
All you have to do is reset your power slip.
the Power button
I think that when you press the button the light or LED turns off and when you do not press it the light turns on.
There is a button by the handbrake hold it for a few seconds it turns it off
Hit the reset button!What reset button you idiot. Hold the power button till it turns off, Then just turn it on again
you can press the power button and it turns off
if your asking how to turn on the computer then i would say probably pressing the on button. or holding the power button til it turns on.
Make sure the device is on. Hold down the tv (or whichever device your trying to program) button first and then the power button simultaneously until the red light stays on solid. Then press the power button, it will flash one time, and keep pressing slowly letting it flash until the device turns off. Then press the stop button...and it is programmed.
First thing you have to do is turn on the power. You'll then have to hold down the TV button until all the lights at the top of the remote light up. Press the power button on your remote, and you should see the TV light on the remote blink a bit before staying on. You will then have to press and release the up arrow until the TV turns off. When your TV turns off, press your # key to be able to then lock in your code. And that should do it!
In a compound Microscope, Power Switch turns on the lamp( Light source)