I agree. It won't cause harm to the engine unless you put in too much amount of fluid.
pour the power steering fluid directing into where you pull the dipstick out to check the power steering fluid.
You can add power steering fluid to your 1988 Chevy Astro by removing the top to the power steering fluid reservoir. Pour the fluid directly into the reservoir.
A reservoir.
it should be a black cylender cup thing that says power steering fluid
You remove the cap on the power steering reservoir, and pour fluid in until it is at the full mark.
Do not run the engine. You need to drain out the fluid antifreeze mixture.You can then refill the power steering fluid.
up ur cock
there should be a line where you pour the power steering fluid telling you when to stop. if there isn't it should say in your car manual.
I am not a mechanic, but I know you have a problem. I would suggest draining the transmission and replacing it with the proper fluid. I wouldn't drive it because I think that might worsen the problem.
Find the power steering fluid canal, make sure you read the cap label that specifies Power Steering Fluid. Pour contents to specified fluid level. You may find the Power Steering Fluid canal on the right side of your radiator block.
To add power steering fluid to a 1967 Chrysler Newport, locate the power steering pump, which is typically found on the driver's side of the engine near the front. The pump will have a reservoir with a cap labeled for power steering fluid. Remove the cap, pour in the appropriate fluid, and then replace the cap securely. Always check the fluid level with the dipstick, if available, to ensure it is within the recommended range.
NOTHING