To add Power Steering fluid to a 1967 Chrysler Newport, locate the power steering pump, which is typically found on the driver's side of the engine near the front. The pump will have a reservoir with a cap labeled for power steering fluid. Remove the cap, pour in the appropriate fluid, and then replace the cap securely. Always check the fluid level with the dipstick, if available, to ensure it is within the recommended range.
You can use power steering fluid or ATF.
It uses regular power steering fluid.
Plain old power steering fluid.Plain old power steering fluid.
A 2013 Chrysler uses power steering fluid +4, or ATF+4.
A good quality power steering fluid from any auto parts store will work. If you are not near a store with power steering fluid you can substitute a good tranmission fluid for Chrysler vehicles. BE CAREFUL AND CHECK THE YEAR , ACCORDING TO CHRYSLER'S 1985 MANUAL, NEVER , NEVER, NEVER USE TRANSMISSION FLUID IN THE POWER STEERING PUMP, POWER STEERING FLUID ONLY.
plain old power steering fluid is the recommended type
The 2000 Chrysler Cirrus typically requires Chrysler Power Steering Fluid, which is a specific formulation designed for its steering systems. If that is not available, you can use a compatible ATF+4 automatic transmission fluid as an alternative. Always check the owner’s manual or consult with a professional to ensure the correct fluid is used.
ATFATF
Regular power steering fluid, available at any part store and places like Walmart.
i was acctually an unbeliever when a service advisor from the Chrysler jeep and dodge dealership told me this but what he had told me that every vehicle they service they run ATF (automatic transmission fluid) in the power steering.
No but you can use atf,trany fluid
It is important to know how to add fluids to a car. Power Steering fluid is added to the container under the hood, that is capped with a yellow lid that says "Power Steering".