0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is voltage in rotor of 11 KV AC generator?
Star (or 'wye') connected alternators have a phase voltage of 6.35 kV, and a line voltage of 11 kV. Incidentally, it's 'kV', not 'KV'.
Why you transfer voltage is 11kv33kv66kv?
All sinusoidal AC voltages are multiples of 1.1. This is due to the form factor, which is the ratio of the quadratic mean value of the voltage with the average voltage, which is pi/2√2=1.1 (approximately). It also provides the most economic means of constructing step up/down transformers.AnswerIn the UK, 33 kV (along with 66 kV) is considered to be a primary distribution voltage level, whereas 11 kV is secondary distribution voltage level. Incidentally, the correct symbol for 'kilovolt' is 'kV', not 'kv'.
Principle of high kV technique and application in radiograph?
High kv techinque is a technique in which high kv and low ma is used.
Why Indian power system in multiples of 11kv?
Multiples of 11 kV are used in many countries. The idea is to deliver a round number of volts so you add on 10% to allow for line losses. So 10 kV becomes 11 kV. In practice lines are operated without a 10% voltage drop now because it represents an unacceptable waste of energy, but we have stuck with 11 kV etc. Common supply voltages used for area distribution are 6.6 kV, 11 kV, 33 kV, 66 kV and 132 kV.
Has Honduras three phase current?
Yes of course. The electrical grid in Honduras has 1,133 km of lines of 230 kV, 919 km of 138 kV, with distribution at 13.8 kV and 35.5 kV.
What happens if the kVp of an X-ray beam remains the same and the mA setting is increased?
If the kVp is kept the same but the mA is increased, the x-ray will have more contrast but there will be no increase in penetration. Increasing kV by 10 is the about the same as doubling the mAs. If the patient is large, then it is better to increase the kV. If the x-ray is too grey, then it is better to increase the mAs.
What are the factors that influence the intensity and quality of a xray beam?
Factors influencing intensityfiltrationvoltage (in kV)target materialcurrent (in mA)distance from the sourceFactors influencing qualityfiltrationvoltage (in kV)target material
What happens if 80 kv used for 6.6 kv?
If you are asking what would happen if you applied 80 kV to a system designed for 6.6 kV, then the answer is that the insulation would break down, and a short circuit fault would occur either between conductors, or between conductors and earth (ground) or, possibly, both!
What happens if the conductor and the semiconductor layer is shorted in 11 KV power cable?
Short Circuit
What city is KV?
There is no city KV. KV stands for Kilo Volts
If X-ray film is to dark what should you do?
If the film is too dark, the xray needs to be retaken with lower kV and mAS settings. Xrays that are only marginally too dark can be looked at under a bright light.
Minimum ground clearance for 765 kv Transmission Line?
Ground clearance132 kv - 6100 mm220 kv - 7015mm400 kv - 8840mm765 kv - 15000mm
What is voltage in rotor of 11 KV AC generator?
Star (or 'wye') connected alternators have a phase voltage of 6.35 kV, and a line voltage of 11 kV. Incidentally, it's 'kV', not 'KV'.
Why only 11kv is used in power systems transmission line?
It isn't. In the UK, transmission and distribution voltages are 400 kV, 275 kV, 132 kV, 66 kV, 33kV, and 11 kV.
Which is the best kv in india?
KV Malleshwaram, Bangalore
How many kv are in a volt?
There are 0.001 KV in one V.
When was KV Mechelen created?
KV Mechelen was created in 1904.
