Want this question answered?
If it's too high, your water might get cloudy, or you might get scale at the pool's water line or inside the pool heater. If it's too low, it can cause the surface of a concrete pool to erode. If it's too low in a vinyl or fiberglass pool, it will have no effect, so don't worry about it. Pool dealers will still sell you calcium to add to vinyl pools, because they like selling stuff, and have been told by the chemical companies that you need to have it. They don't know why, though.
No, because it's not the chloride part that's responsible for the hardness, it's the calcium. Sodium chloride is actually used in water softeners, so it's not a great choice if you're looking to increase the hardness. You could use calcium hydroxide, though this will also make the pool more alkaline which may not be ideal.
The best thing to do if you are inexperienced in pool maintenance it to take a sample of water from your pool in a clean bottle from about an arms length in depth to you local pool shop. There they will test the water for free and tel you how much chlorine your pool needs. Take along the dimensions of the pool as well for them to calculate the requirements.
Calcium. This is a serious problem in the southwestern states (AZ, CA, NV). Calcium will leave a white ring around the pool tile. If left to build up, it will require hiring a pool tile cleaning company to remove it. There are 2 primary methods of removing the calcium: blasting with glass beads or blasting with magnesium sulfate.
High Ph or high alkalinity in pool water makes the water "hard" and leads to "scaling" or calcium buildup on pool walls and equipment. Over a long period, alkaline water can be harmful to equipment and create a film of calcification on tile or pool walls. As far as harm to people, high Ph makes the water feel "slimey" and it is easier to slip on steps or the floor of the pool. It can dry out skin and feel ichy. In contrast to high acidity- high alkalinity seems to cause less skin discomfort. Each pool is an ecosystem and needs to find a balance...one person's pool could be in fine balance at 7.8 while another is better at 7.2
Baking soda will not soften (remove calcium hardness) from pool water. It will raise total alkalinity.
Low Calcium Hardness in pool water means that there is low calcium in the water and is considered "soft" and soft water tends to be corrosive. It will etch away and your plaster and any metal object the pool water touches.
The best way to lower calcium hardness in the pool water is to drain the water and refill with water of lower calcium hardness. Have the calcium hardness tested for both the pool water and fill water. Ideal range is 175-300ppm. There are 'calcium reducer' products available through pool stores, but not sure how effective or economical they are.
To raise calcium in your pool use calcium chloride. You premix it in a container to let it dissolve and add 6lb for 10pmm in a 50,000g pool.
You can, if the water presently in the pool is 'hard' - but be very careful to keep an eye on the Calcium Hardness of the pool water. If you filled a pool with water from the softener, the water would be hungry for calcium and drag it out of the pool walls, making them feel and look like sandpaper. Calcium hardness should be kept within 200-275ppm. best to use regular water for topup and keep the pool water properly balanced (see your local pool store).
If the calcium is a result of pool chemicals, draining some or all of the pool water will lower the calcium hardness level. If the cause is the fill water, commercial hardness reducers or chelating agents will bond with the calcium to keep it trapped in solution.
If it happens after you vacuum your filter is not retaining the dirt.If it happens after you brush you are stirring up the dirt. If it happens after you put chlorine, check your water balance at your local store and make sure you are not using calcium hypochlorite as your chlorine shock.
Calcium chloride increases the hardness of water. Proper hardness is critical to balancing the water in a pool. Proper hardness is especially important in a plaster pool to prevent leaching of the plaster finish, which results in a rough surface. Calcium chloride can be purchased at home improvement stores at significant savings over pool supply outlets.
It will make the water cloudy. to remove calcium carbonate simply lower pH in the pool to 7.0 or lower and calcium carbonate will redissolve back into suspension and water will clear up. You can get this characteristic by adding sodium Carbonate too quickly.
they will usually overflow, but in some cases they will pop.
Turn the pool upside-down and knock on the bottom.
Filling a plaster pool with water from a salt type softener will severely damage the plaster. Salt water softeners exchange salt for calcium and leave the water in a calcium deficiency. Seeking its dynamic balance the water will leech calcium from the plaster to satisfy its need for calcium making the plaster etched and rough. Adding salt to regular tap water is not the same as filling with soft water as the calcium is still present in the tap water. 180 ppm of calcium is considered the minimum and low calcium can be raised by adding calcium chloride.