Want this question answered?
You Should Cut The Yellow Wire! : D
you take the blue wire and connect it with the red then connect it to the yellow then you cut the green wire and there you go!
Cut the Wire was created in 1987.
Just use some wire cutters or sharp scissors & cut (only until you feel wire)while you rotate around. Once you cut all the way around, pinch where you cut (carefully)with implement & pull off insulation. It takes a little practice,& occasionally you will go thru wire as well, but that's how it's done.
Phisical
You Should Cut The Yellow Wire! : D
first u cut the red wire then blue then the green right by the blue wire
Cut the blue wire that goes into the actual motor
cut the blue wire and do what you gotta do then run. cut the blue wire and do what you gotta do then run.
Cut the solid blue wire
Cut the blue wire.
Nothing. Try it.
you become a dog
blue with the yellow stripe and pink pocadots
If your are using a wire kit, you need to connect the blue and/or blue/white wire from the harness to the blue/white wire from your radio. Now if you have cut your wires you will have to locate the one wire that will turn on your factory amp.Good Luck!!!!
you take the blue wire and connect it with the red then connect it to the yellow then you cut the green wire and there you go!
aftermarket is a clear red or blue the stock is blue if u cut this wire remember that if this wire touches and part of the cars body that is will fry the deck(stero) you have tp take the battery out of the car first before u mess with this wire