Nothing.
you dont
i dont know can u tell me
no because a 1991 accord comes whith a ignition coil inside of the distributor end 1993 the ignition coil is outside end the holes dont line up
missfire on star up first 1000 rpm ignition coil is going bad use a ford coil if you dont want a lot of problems with aftermarket units
I dont know but you better find out
it could be a lot of things, you should start by checking the ignition, disconnect spark plug wires (remember which goes where first) and make sure u put them next to something with ground (-) ( like the engine block) and have someone crank the car, if they dont spark that means you have bad cables or bad ignition coils, (you can get the ignition coil checked at autozone for free) after that you might want to check the ignition fuse. and all others while your at it. if that dont work just reply, ill help u out.
the car dont star not run ,i see before the stater and the starter is good but i dont no the car not start now and need the coil ignition diagram thank
i dont no ask your teacher
You dont have coil paks on these cars they use a coil and distributer
in the dist. theres a ignition modgual change it if you still dont have fire change the coil. im having the same problem. I replaced the head gasket to my lemans and never disturbed the timing or anything I markedt where everything goes and went together excellent. I replaced the coil and ign. modjual and put the dielec grease on the modual and still no fire. I rechecked everything. now what? I even replaced the sparkplugs and wires.
i dont know you tell me
Change them one for one so you dont get them mixed or use sticky tape to identify each component and its position.