If you put two incandescent bulbs of the same wattage in series, they will both light with the same intensity. If one is lower wattage than the other, the lower wattage bulb will light brighter than the oter one.
If you put two 115 volt bulbs of the same wattage in series across 230 volts, both will light equally, but if you use dissimilar wattages, the smaller one will burn out.
the light bulb gives off more light
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
In a series circuit, all bulbs are necessary to complete the circuit. If one bulb goes out, the circuit is broken, so none of the bulbs would light up.
When you put a light bulb in series with a inductor, the inductive reactance of the inductor reduces the current available to the light bulb, making it less bright. For this effect to be noticed, however, you need a very large inductor. To cut the current in a 60W bulb at 120VAC/60Hz by one half, for instance, you need an inductor around 0.6 henrys.
In a series circuit, when a light bulb is broken, it creates an open circuit which stops the flow of current throughout the circuit. As a result, all the other light bulbs in the circuit will also stop working because they are all connected in a series.
when a light bulb is switched on it will blown..............
A light switch is in series with the light bulb it controls.
When you unscrew a light bulb in a series circuit, the circuit will break and all the other light bulbs in the circuit will turn off. This is because in a series circuit, the current flows through each component in succession, so removing one component interrupts the flow of current to the rest of the circuit.
If you unscrew a light bulb in a series circuit, it will cause an open circuit, which will break the flow of current in the circuit. As a result, all other bulbs in the series circuit will also turn off because there is no longer a complete path for the electricity to flow.
In a series circuit, if a light bulb is missing or broken, the circuit becomes incomplete, and the electrical current cannot flow. As a result, the other bulbs in the series will not light up. All components in a series circuit must be functioning for the entire circuit to operate.
The function of a light bulb in an electric circuit is that it turns electrical energy into light.
it should become dimmer