0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What happens if you put a metal door frame in cold weather?
Why not put it on a house instead
What is the cost to install hollow metal door frame?
how much to charge to install metal frame doorsoors
What part of the door is inserted onto the base frame?
metal pin
What part of the door is inserted onto the base frame of the sss?
Metal pin
Why does your door shut easier in the winter than in the summer?
in the summer, there is more humidity and it causes the wood to swell. When it is cold outside, the swelling goes down and it is easier to close the door without it rubbing against the frame. Heat expands everything, the doors and house included. When they expand the door will rub against the frame. When it's cold things will contract or constrict and therefore the door and house will shrink and be easier to open. ( The house will shrink but since there is a space where the door is the house won't shrink inwards at the door frame but when it expands it will close the gap of the door frame).
How do you repair rubbing steel door and frames door hinge screws are either stripped or loose and doors are rubbing against steel door frame and the door frame is installed into a concrete wall?
you can't that's the problem with cheep construction the builders con you into buying them as a cheaper option on your house but when the house shifts and what house doesn't? your then in trouble it costs 10 time more to fix a metal door than the convectional wood door frame. PS. Stay away from metal doors on houses
Threshold door frame metal detector?
CEIA Spa makes metal detection used by Governments, etc. CEIA Spa makes metal detection used by Governments, etc.
What is the Difference between door jam and door frame?
A door frame is the rough opening that the door and door jam go in to. Door frames are part of the framing of a house and the door jam is the out side frame that the door sits in.
After you take off the Door Panel for the rear windows that needs a new system whats the next step do you take off the metal frame on the door or No Please Help?
What frame? what type of system? Normally all work on the inside of a door is done through the holes in the frame behind the panel, if the window is in your way disconnect it and pull it up and out of the way
Which is better steel or fiberglass doors?
I think steel doors are much better when compared to fiberglass doors in terms of strength. If you are planning to install a steel door here are easy steps to do it : Firstly, use a pry bar in order to pull the upper molding of the existing door. Repeat the steps again on the bottom as well as the middle part of the molding. Get the hige pins out and then unscrew the hinges. Next, work on the wall framing. Start placing the metal studs on the new frame opening. By using a set of screws, you can secure the frame directly into the existing sill and header framing. Block the areas which require support. Next, you have to set up the door. You may need another person to help in this process. Place the bottom of the steel door in the door opening. Tilt the steel door up into place. Using the shims, make sure to level and orient the door in the right position. Now you have to shim the door. You have to manupulate the shims on each side of the door frame between the metal studs and frame. This will make the door to plumb and level. Then you need to screw the lockset portion of the frame to the metal studs and do the same to the hinge of the frame. Happy to help you.
Your TorqueMaster garage door does not want to open in cold weather?
It is hard to analyze without seeing the garage door, but likely this is a mechanical problem due to the cold. Metal that cools shrinks, so it is possible that the garage door, components, such as the chain are stuck.
Where is the chassis serial number on 1998 C280?
Should be on a sticker in driver door frame, and sometimes a metal plate near hood latch.
