Want this question answered?
The never paint will never harden, mostly stay tacky
dont use can spray paint it wont hold up to gasoline. paint does not have any paint hardener in it
Different paints require different amounts of hardener. If there is a label on the paint it should have the ratio on that. One part hardener to the about of paint you use will usually be enough. You can't store the paint after the hardener is in it, it will set up in the can. ----- In actuality a 1:1 mixing ratio of paint to hardener (catalyst) will usually result in brittle massively overcatalyzed paint that will flake and/or chip easily. However as previous stated different paints require different amounts of hardener, alway request a Product Data Sheet (PDS) or Technical Data Sheet (TDS) from the paint manufacturer or retrieve one from their website before mixing.
Measurement and mathematics, to get the mixture of paint/thinner/hardener correct. Some Chemistry, to know how to handle and dispose of the chemicals used.
This depends on the type of paint. You will have to follow those directions. The colour coat I used recently does not use thinner. The clear coat used 25% thinner and 25% hardener.
That would depend on what type of auto paint. With base coat on most brands, the drying time is controlled by which solvent you use to thin the paint. With acrylic enamel it's drying time is controlled with solvent and a hardener.
It will not stick very well unless you use a primer in between.
no you can use the polymer clay
i really dont know
dont have a clueee !! hahahax
No They dont they use some type of other paint, im 35% choctaw my grandma is 89% choctaw.
I fact yes it will. The hardener is just that, to speed up the curing time. With extra it cures faster, with less it takes longer. If you dont use any at all the curing will take exponentially longer, however it is epoxy steel resin and it will eventually dry (cure) even without the hardener it can not stay wet forever