They dim as the total resistance of series of resistances is the sum of the resistances; and current = V/R.
As a series circuit, as asked, all bulbs will go off because of that just one bulb.
Overall brightness (not individual bulbs' brightness) will increase when we connect them in parallel & it will decrease when we connect them in series.
-- If the bulbs are in parallel, then the addition of a bulb has no effect on the brightness of those that were there before. -- If the bulbs are in series, then the addition of a bulb causes the brightness of those that were there before to decrease. (And I wasn't even there when you did the experiment !)
u see the light bulbs on a series circuit's brightness evolves and the brightness on a parallel's circuit dont
at like 1minute after each other.
ANSWER: The brightness of both bulbs will decrease. If the bulbs are identical the current will decrease to 0.2 Amps. This is a simple series resistive circuit, the more bulbs you add in series both the amperage and bulb brightness will continue to go down.
If they have the same resistance they will. Kirchhoff's' Law.
The bulb is dim.Because,the voltage is drops in series connection so you add more bulbs in series the last bulb got low voltage that reason for the bulb is dim
To get full brightness, the rated voltage has to be applied across the bulb. When several bulbs are connected in series, the voltage gets devided among these sevral bulbs and correct rated voltage will not be applied acros each bulb, hence the brightness reduces.
The brightness would remain constant but the power draw will increase. If the circuit was series wired, the brightness would go down as you added bulbs.
It depends what is the outcome of burning. If that light has created open circuit, circuit will break and there will not be any current. But if there is short circuit means overall resistance is decreased. Thus current will increase. Besides overall brightness will also increase. Thus, if in a series lesser the number of bulbs more will be brightness.
Bulbs in a parallel circuit draw the same amount of current, so each will display the same brightness. Bulbs in a series circuit share the current so all bulbs will appear dimmer.