Want this question answered?
An electric current will flow if there is a voltage, and a conducting path (usually a closed circuit is required).An electric current will flow if there is a voltage, and a conducting path (usually a closed circuit is required).An electric current will flow if there is a voltage, and a conducting path (usually a closed circuit is required).An electric current will flow if there is a voltage, and a conducting path (usually a closed circuit is required).
Electric current is measured in amps not voltsElectric voltage is measured in volts.
The voltage drop across each resistance will go up, and the current through the circuit will go down.
High Voltage Electric Current.
I = E/R If resistance is constant, then current is directly proportional to voltage. Double the voltage ===> the current will also double.
Correct Answer= "the current will increase"
In this case current flows from a high voltage to a lower voltage in a circuit.
An electric current through a resistive circuit can be increased by decreasing the resistive load or increasing the voltage of the circuit.
If resistance is increased, current decreases. Ohm's Law: current equals voltage divided by resistance.
In an alternating current circuit the voltage can be stepped up ordown efficiently with a transformer.
If the load resistance is constant, then increasing the voltage will increase the current by the same proportion -i.e. doubling the voltage will double the current.
As the resistance is reduced across the same voltage, the current increases.
true
If resistance is increased, current decreases. Ohm's Law: current equals voltage divided by resistance.
Ohm's Law states Voltage = Current x Resistance. Hence if voltage is increased and resistance is constant, current will increase proportionally to the rise in voltage.
the formula for electric current is VI ,where v is voltage then I is the current. the unit used for current is ampere and volts for voltage. multiply the total I to the Voltage The formular of electric current is given by I=V/R ,I=P/V
Electrical current generally increases as voltage increases due to a need for increased capacity. This is directly controlled from the transmission side but varies based on the overall load.