An electromagnet if formed by pushing current through a coil. If the circuit is truly open, current will cease to flow, thus no electromagnet.
No.
A safety device that uses an electromagnet to shut off the circuit is called a contactor.
A closed circuit works by having electricity flow in a complete circuit or circle or any closed shape.
To close a circuit in electrical terminology is to close any open devices that are in series with a connected load. Once this happens the current will flow through the load and the load is then termed as energised. In the case of a motor circuit the motor will operate. In the case of a lighting circuit the lamps in the circuit will energise and light the area in which they are installed.
In order to illuminate the light, you need a closed circuit. It would be normally open, and closed to indicate that the door is open.
when a circuit is closed, electricity can move though it.
If the circuit is closed the electric current will be closed as well.
when a circuit is closed, electricity can move though it.
Current flows
A motor transforms electricity. Inside the motor, there is a permanent magnet and an electromagnet, which can rotate. When the circuit is closed, the electromagnet is constantly repelled and attracted to the permanent magnet. This will cause the electromagnet to turn. It also causes anything that is attached to the electromagnet to turn, causing motion.
No.
The electromagnet in the circuit breaker is used for instantaneous tripping if short-circuit condition arises. At defined current level the electromagnet develops the force high enough to cause the tripping of the mechanism.
A circuit diagram could be related to a closed circuit if the diagram is of a closed circuit.
When a circuit is not closed it is not operating.
When a circuit is not closed it is not operating.
A safety device that uses an electromagnet to shut off the circuit is called a contactor.
Another word for closed circuit is a loop.