Want this question answered?
Usually around 12 volts from six 2 volts cells connected in series.
The voltmeter would read 12 volts. An ammeter connected to to battery would only read 4 amps (12 volts divided by 3 ohms =4)
Depends on how you connect them together. Connected them in a series and you will have 18 volts. Connected them in parallel and you will still have 9 volts just double the capacity of 1 battery. Click the link to see these 2 connections.
Because they are connected in series. Lets say you have a flashlight that holds 2 D cell batteries. Each battery puts out 1.5 volts. Connect them in series and together they put out 3 volts. The flashlight is designed to run on 3 volts. A electronic device that uses 4 AA batteries is using 6 volts even though each battery is only putting out 1.5 volts. Connected in series you add to the voltage with the addition of each new battery.
i think it is because some energy is being lost throug the motor's consumption.
depends on the voltage of the battery being used. USB voltage is 5 volts DC. If you use a car battery, which is generally 12 volts, I would think your device would not like this. But to answer your question. Yes, it will charge. But not properly if you do not use the correct voltage.
For the most common battery chemistry, 3 cells of 1.5 volt each.
Powers the starter motor and all the other electrics in the car when the engine is not running. When the engine is running, the battery is not needed because the alternator of which works very much like a bicycle dynamo runs all of the electrics in the car. It also keeps the battery charged. If fitted to a bicycle a dynamo will generate electricity to the bike lights when you peddle. An alternator does the same thing but with engine power instead of peddle power. the only difference between a dynamo and an alternator is that an alternator alternates the current from AC to DC a dynamo does not.
You just connect them in Parallel. Two 12 volt batteries connected in parallel will output 12 volts. Two connected in Series will output 24 volts. Just connect the negative terminal on the first battery to the negative on the second battery. Then connect the positive terminal on first battery to the positive on the second battery. Connect the cables to the second battery, positive to positive and negative to negative. Click the link for a diagram.
Yes, if you connect the two batteries in series. You will then have 16 volts, but the current will stay the same as if you only had one battery connected.
In resistive circuits,when you need the same current in the whole circuit,you use series circuit because in series circuit current remains the same.If you have two batteries of 12 volts each,and you need 24 volts you can arrange them in series to get 24 volts you have to connect them combine with opposite terminals.positive of one battery will connected with negative of other battery,and negative of second will connected with the first's battery positive terminal,they are in series now.
7.5 Volts