a complete circuit is a circuit through which a current can flow
(see closed circuit)
A complete circuit is almost like a circle. Energy flows through this circle in order to make the light bulb light.
A circuit that has a power source, a load such as a light or motor to power and a ground point.
A complete circut is a circut with no gaps.
An (AC) circuit consist of basically two wires (one Hot, one Neutral) with components such as switches and lights connected in series between them. A short circuit occurs whenever a switch is closed causing an element to be energized such as the light bulb. This would be described as a short circuit or fault.
Without a completed circuit current will not flow. An open circuit would be represented by a room switch in the off position and the light fixture off. Turn the light switch on, current flows and the fixture turns on.
The electrons flow through this and if their is a device it will turn on for example a lightbulb would light up
electric current will flow through it.
battery\
An open circuit or a short-circuit (if that circuit is complete).
no, the circuit won't complete
to complete circuit
In the simplest form; The difference between a complete and incopmlete circuit is... Complete means that electricity CAN and WILL flow through it where as with an incomplete circuit does not have the ability to conduct current is broken... Here is an example. -----/----- Incomplete cicuit, something preventing electricity to flow ----------- complete circuit, electricity can flow.
If you ground the flow of current like the last part of your question states you will not have a complete circuit as the circuit will open on a short circuit. To make a complete circuit operate you need a power source, an overload device to protect the conductors of the circuit, conductors to carry the current and a load across the power source which causes the current to flow in the circuit. Leave any one of these things out and you will not have a complete circuit.
Electricity flows in a complete circuit
*Look at the simple circuit illustrated in Figure A-2. What will happen when only switch S1 is closed? Correct Answer= "Nothing will happen-the light bulb won't light up." <<>> If there is a load in the circuit the load will operate. If there is no load in the circuit and it is complete then a short circuit will occur and something in the circuit will burn open. If the circuit is complete and there is a fuse or breaker in the circuit, then the fuse or breaker will open the circuit.
When an electrical switch is in the off position, the circuit is interrupted. When the switch is on, the circuit is open and complete.
It doesn't matter where the bulb is in respect to the battery, as long as the circuit is complete, the bulb will light up.
In a series circuit, all bulbs are necessary to complete the circuit. If one bulb goes out, the circuit is broken, so none of the bulbs would light up.
An open circuit or a short-circuit (if that circuit is complete).
no, the circuit won't complete
Current flows through a complete circuit.
Complete circuit.
An open circuit
one
if an electric circuit has potential difference. Electricity will flow only if an electrical circuit is closed.