The wheels will lock up and skid and possibly cause the driver to lose control unless of course the vehicle has abs brakes in which case the vehicle would slow to a stop without losing control.
When a driver suddenly applies the brakes, the car decelerates rapidly, but your body continues moving forward due to inertia, the tendency of objects to maintain their state of motion. This forward movement happens because your body is not directly attached to the vehicle’s braking system. As a result, you experience a jerk as your body lags behind the car's sudden stop. This phenomenon is a basic principle of physics that explains how forces affect motion.
When a driver applies the brake pedal, force is transmitted through the brake system to the brake pads which press against the brake rotors. The friction between the pads and rotors slows down the rotation of the wheels, converting the driver's effort into braking force that stops the vehicle.
Try to pump it to build up the pressure.
Braking distance is a function of pressure applied to the brake pedal.
The car's acceleration is in forward direction.
When a driver applies the brakes, the vehicle experiences deceleration due to the friction between the brake pads and the brake rotors. This rapid slowing down shifts the weight of the vehicle forward, causing any unsecured objects or passengers to slide in the same direction. Additionally, the inertia of these objects causes them to continue moving forward until they are stopped by a seatbelt or other restraint.
It SHOULD stop in a straight line ! If you mean like in the movies, they turn the steering wheel while they step on the brake - sending the car into a controlled skid.
Rapidly pump the brake pedal.
check your fuses. Should be located near the driver side kick panel.
It applies pressure to the brake pads.
It applies pressure to the brake pads.
I had to brake suddenly to avoid hitting the deer and prevent a break in the fence.