Nothing, strong (H2SO4) and weak acid (NH4+) do not react with each other.
However the weak base ammoniA (NH3) will react to form ammoniUM (NH4+) ions by gaining protons from strong acid (H+)
The following reaction occurs H2SO4 + 2NH4OH --> (NH4)2SO4 + H2OSulphuric Acid + Ammonium Hydroxide --> Ammonium Sulphate + WaterThis is a neutralization reaction.
No reaction takes place. pH of the solution increase.
the ammonium salt produced by a neutralization process, by reacting the ammonium hydroxide with dilute sulphuric acid. the amount of ammonia added into the sulphuric acid is enough when the amniotic smell produced. drop the ammonia little by little. then, heat while stir the mixture until the solution becomes 1/3 of the original volume. lastly, to obtain the salt, the filtration process should be done after the solution is cool.
Ti identify ammonium ion, NaOH is added to the original solution of the ammonium salt and a paper dipped in HCl is brought to mouth of test tube. If white vapours are observed, then ammonium is present. Or Neissler's reagent(K2HgI4) can be added to the original solution of the ammonium salt. A reddish brown ppt. is observed in case of ammonium ion.
It will dissolve in the water.
The following reaction occurs H2SO4 + 2NH4OH --> (NH4)2SO4 + H2OSulphuric Acid + Ammonium Hydroxide --> Ammonium Sulphate + WaterThis is a neutralization reaction.
No reaction takes place. pH of the solution increase.
the ammonium salt produced by a neutralization process, by reacting the ammonium hydroxide with dilute sulphuric acid. the amount of ammonia added into the sulphuric acid is enough when the amniotic smell produced. drop the ammonia little by little. then, heat while stir the mixture until the solution becomes 1/3 of the original volume. lastly, to obtain the salt, the filtration process should be done after the solution is cool.
the ammonium salt produced by a neutralization process, by reacting the ammonium hydroxide with dilute sulphuric acid. the amount of ammonia added into the sulphuric acid is enough when the amniotic smell produced. drop the ammonia little by little. then, heat while stir the mixture until the solution becomes 1/3 of the original volume. lastly, to obtain the salt, the filtration process should be done after the solution is cool.
Ti identify ammonium ion, NaOH is added to the original solution of the ammonium salt and a paper dipped in HCl is brought to mouth of test tube. If white vapours are observed, then ammonium is present. Or Neissler's reagent(K2HgI4) can be added to the original solution of the ammonium salt. A reddish brown ppt. is observed in case of ammonium ion.
It will dissolve in the water.
If the silver nitrate and ammonium chloride are both in solution when mixed, the very sparingly soluble silver chloride precipitates as a solid, leaving ammonium nitrate in the solution.
Calcium carbonate is rather INsoluble, so there is no solution of it. I do not know why ammonium oxalate is added to a calcium carbonate solution. Calcium oxalate will then precipitate out of the solution. The ammonium and carbonate will create a weakly bond compound. Actually, more of the ammonium ion will be in solution as free ammonia and more of the carbonate ions will be in solution as free carbon dioxide. That is the nature of those two substances. So, you will have a solution that has a calcium oxalate precipitant on the bottom and is slowly giving off ammonia and carbon dioxide.
no reaction/no change
What is the evidence for a shift in equilibrium's when ammonium chloride was added to the stock solution in hydroxide phenolphthalein? In: http://wiki.answers.com/Q/FAQ/2455 [Edit categories]
there is no chemical change when ammonium chloride is added to water. NH4Cl + H2O + heat -> products. it also cold when it is dissolved in water.
(NH4)2C2O4 + CaCl2 ---> 2NH4Cl + CaC2O4