Want this question answered?
AMPERAGE
friction of the electrons are not moving freely in the wire, they bump on each other
Electric current is produced.Nothing until it is moved at right angles{90 degrees) to the magnetic field between it's poles. The faster it moves the larger the voltage measured between the ends of the wire.
Electric current is produced.Nothing until it is moved at right angles{90 degrees) to the magnetic field between it's poles. The faster it moves the larger the voltage measured between the ends of the wire.
It bends.
AMPERAGE
Its called a superconducting wire.
The key of a piano connects to a system of levers which moves a small hammer that strikes a wire inside the piano. The wire will then vibrate and make a sound. That sound is then amplified by the wooden body of the piano, which resonates with the wire.
When your head unit is turned on, the auto-antenna wire sends a signal to your automatic antenna (meaning moves up and down as your HU turns on and off respectively) which moves it up or down. It works in the same way as the Remote Amp Turn-On wire works, which turns your amp on with you HU, then off when you turn your HU off also. Both are usually coloured blue, or blue and white on aftermarket stereo systems.
friction of the electrons are not moving freely in the wire, they bump on each other
look under the hood and rev. your engine the piece that moves is the throttle on the throttle there is a wire you need to take the wire and move it back so there is more wire exposed just grab the wire with a clamp and move the throttle up and you should be fine.
Current
Down the Wire was created in 2009.
Electric current is produced.Nothing until it is moved at right angles{90 degrees) to the magnetic field between it's poles. The faster it moves the larger the voltage measured between the ends of the wire.
Electric current is produced.Nothing until it is moved at right angles{90 degrees) to the magnetic field between it's poles. The faster it moves the larger the voltage measured between the ends of the wire.
To avoid any contamination.
Faraday says you will induce a current in the wire.