The tie rod is a part of the steering linkage. It connects your front wheel to the rest of the steering system. If the tie rod breaks, the front wheel is free to move in any direction. Wheel alignment (caster) should be set such that the wheel will tend to stay in a straight line, but any bump could turn the wheel drastically and send your car out of control. A broken tie rod can be a fatal disaster on a highway, especially if your wheel alignment is off. More likely it will result in a car that can be controlled just enough to get off the road and call a tow.
Easy answer. You can't travel more than a few feet with a broken tie rod. A tie rod is an essential link between the steering wheel and the tire. A broken tie rod will allow the tire to steer any direction with no control by the driver. --Ken
No, if a tie rod is broken you would have no steering control.
Tie Rod.... I believe he is referring to the axle, the tie rod is connected to the axle.
I have added a link to a diagram in the links section.
if a tie rod breaks you will lose control of the tire it broke on , causing you to crash..
no
You wreck the car !!!!!!!!!
The tie rod is a rod acting as a tie in a building or other structure. A tie rod is also referred to as a rod in the steering gear of a motor vehicle.
on a steering rack the inner tie rod is threaded and will be the mount for the outer tie rod.
I believe your referring to a tie rod, which is a steering component. There is an inner tie rod and an outer tie rod. The inner tie rod connects to the steering rack which is what is used to turn your wheels left or right. The outer tie rod connects to the inner tie rod and also to the steering knuckle. If you've got a newer 300 series car, chances are your gonna have them replaced because there are some problems with tie rods on these cars. A TIE rod connects the steering to the wheel.
Remove wheel and properly support vehicle. Remove outter tie rod from steering knuckle. Remove outter tie rod, count how many turns it takes to remove from inner tie rod. Remove inner tie rod boot. Use inner tie rod tool to remove inner tie rod. Install new inner tie rod (with inner tie rod tool) and do not overtighten. Properly install inner tie rod boot (you can use a zip tie on part that attaches to rack). Install outter tie rod and use the same amount of turns that you counted during removal (this will help with alignment). Install tie rod to steering knuckle and use a new cotter pin. Put wheel on and get an alignment.
I believe your referring to a tie rod, which is a steering component. There is an inner tie rod and an outer tie rod. The inner tie rod connects to the steering rack which is what is used to turn your wheels left or right. The outer tie rod connects to the inner tie rod and also to the steering knuckle. If you've got a newer 300 series car, chances are your gonna have them replaced because there are some problems with tie rods on these cars. A TIE rod connects the steering to the wheel.