answersLogoWhite

0

If you run it that way you will cause internal damage.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Where do you add the antifreeze Lincoln LS?

You can add it to the coolant reservoir. It's located in the top left corner of your engine. Make sure your car is cool before you add in the antifreeze.


How do you Add antifreeze to 1996 Crown Victoria?

With the hood open, on the passenger side there is the overflow container for the rad. The cap might be pressurized if the engine is hot. You add the antifreeze there.


Where to you add antifreeze in your Dodge Caravan?

When the engine is cold you can add to either the radiator or the coolant recovery bottle.


Should the engine be cool or running when adding antifreeze?

Your engine should be cold ( to be on the safe side) when adding antifreeze/coolant. i let the car sit overnight and then add it.


Where do you add antifreeze in the engine I don't want to pour it in the wrong place I bought an antifreeze that is already mixed.?

Don't forget 50/50 solution too What kind of vehicle? What size engine? You don't add antifreeze to the engine, anyway. There should be an overflow jug on post '85 vehicles and on pre '85 vehicles you add the antifreeze to the radiator only. Please check your owner's manual or ask your car dealer for further information.


How do you add coolant to a Dodge Durango?

There is a reservoir container marked "coolant" in the engine compartment. Add a mixture of 50% antifreeze and 50% water. (If you use "50/50" or "pre mixed" antifreeze, DO NOT ADD WATER). Let the engine get warm and fill to the full line.


How do you add antifreeze to a 1990 Cadillac brougham?

To add antifreeze to a 1990 Cadillac Brougham, first ensure the engine is cool and then locate the coolant reservoir, which is typically near the front of the engine bay. Remove the cap, and if necessary, add a 50/50 mixture of antifreeze and distilled water until the level reaches the appropriate mark. Be cautious not to overfill, and check for any leaks after adding the antifreeze. Finally, replace the cap securely before starting the engine.


Where do I add antifreeze on a Ford Ranger?

you can add antifreeze in 2 places. If engine is cold,open radiator cap and poor directly in.Also there is a antifreeze reservor thatr you can poor it in if it is empty. Remember just add fluid until it comes up to the cold line on resv.


How do you add antifreeze to scion Tc?

Remove the radiator cap when the engine is cool and add the coolant into the radiator or you can add to the coolant overflow bottle. DON'T remove the radiator cap when the engine is hot!!!


Does the car need to be running when adding antifreeze?

No , it's best to add coolant when the engine is cold


How do you add antifreeze to 2007 suzuki forenza?

To add antifreeze to a 2007 Suzuki Forenza, first ensure the engine is cool and locate the coolant reservoir, typically found near the front of the engine bay. Remove the cap from the reservoir and add a 50/50 mix of antifreeze and water, filling it to the "FULL" line. Replace the cap securely and start the engine, allowing it to run for a few minutes to circulate the coolant. Check the level again and add more if necessary.


Where do you add antifreeze to the radiator of a Chrysler Cirrus?

To the overflow tank and if the radiator has a cap,you will need to fill it with the engine cold.