Most Accurate Answer:
The cooling fan.
This can sometimes be misinterpreted as the CPU fan, but that is the HEAT SINK that is located on top of the central processing unit on the motherboard.
The cooling fan is on the case, next to the power supply to prevent overheating and to keep the case cool (sometimes referred to as the CASE FAN).
---------------------------------------------------------------------------------------------------------------------------------------
SUBMITTED BY PREVIOUS EDITOR:
which are supplied by the P1 power supply connector?
a)12v,6v and 3v
b)12v,5v and 3.3v
c)12v,4v and 1.8v
d)6v,5v and 4v
The simplest way is that most power supplies have a built-in fan (or several) to keep them cool. If this fan is blocked, or the case airflow is going opposite to the power supply airflow (which typically pulls air from the case, out the back) then it can cause overheating. Lowering the power draw on the power supply will also reduce the amount of heat it produces, especially on the 12v rail.
Keep Your Hands Off My Power Supply was created in 1984.
To keep the power supply cool. If there were no fan the power supply would overheat and fail.
Sometimes when people buy a computer power supply unit (PSU), there are several components in the box: a AC power cable to connect the power supply to the wall mains outlet, the power supply itself (PSU) that converts mains power into more useful forms of power, and one or more DC power cables that connect the power supply to the motherboard and other parts of the computer. (On a modular power supply unit, those cables can be detached from the PSU). A computer power supply is in a metal box that is difficult to open, so most people treat a computer power supply (PSU) as a single indivisible component. Inside a computer power supply is a transformer to help convert mains power into more useful forms of power, power diodes and power transistors typically mounted to a heat sink, and other components to help the conversion or to filter the power to meet EMC requirements, and often a fan to blow air on the heat sink to keep the transistors from overheating.
Keep it plugged in.
Sometimes when people buy a computer power supply unit (PSU), there are several components in the box: a AC power cable to connect the power supply to the wall mains outlet, the power supply itself (PSU) that converts mains power into more useful forms of power, and one or more DC power cables that connect the power supply to the motherboard and other parts of the computer. (On a modular power supply unit, those cables can be detached from the PSU). A computer power supply is in a metal box that is difficult to open, so most people treat a computer power supply (PSU) as a single indivisible component. Inside a computer power supply is a transformer to help convert mains power into more useful forms of power, power diodes and power transistors typically mounted to a heat sink, and other components to help the conversion or to filter the power to meet EMC requirements, and often a fan to blow air on the heat sink to keep the transistors from overheating.
To power all the components of a computer.
Rerailer is a tool that helps keep the train on track and terminal rerailer is the one that connects the model train to the power supply or electricity.
The separation of power helps the government. This helps keep power and money.
overheating or drawing too much power
Cisco power supplies are computer parts. The power supply is the part of a computer that receives electric power from a plug and sends that power to the other parts of the computer. Power supplies also include fans to keep the computer at a reasonable temperature.
It is a dual purpose jacket and can not only supply clean power supply to charge phone battery but the advanced polymers from which the jackets are made will also keep you warm and protect you from elements because it is water resistant.