u can open the trunk and take off positive(+),or negative (-) battery pool connection.the car will turn off.
Yes, the ignition switch must be in the ignition position -not- the accessory position.
Some Saturns have a problem with their ignition system. It just freezes up for no reason. You have to replace the ignition cylinder, and probably the ignition switch, too. I have an '06 Ion that just did that a couple weeks ago. I took it to a mechanic, and he had to call Saturn to find out what was wrong with it. They told him to replace the whole steering wheel column, but I found out later that I probably could have just done the ignition switch and cylinder. You have to buy the parts from Saturn, and get the ignition cylinder keyed by a locskmith.
the wire is Yellow coming out of the ignition switch going to the Neutural safety switch, then purple from the neutual safety switch to the starter
You simply need to turn your steering wheel either way to get the ignition switch to unlock. Turn the key while you are turning the steering wheel and it will unlock it.
Ur life suck that why
It is false that the stat ignition switch position only activates the starter motor.
maybe ignitoin or ignition switch
you need to be more specific. i am going to assume you want to know in what position is the ignition switch in lock. usually it is 2 positions back from "run" but it is in whichever position the key comes out of the ignition.
check the battery voltage, check battery cables, check ignition switch(where you turn the key), or check the crankshaft position sensor. cheers
There is NO emergency cutoff switch on ANY s-series. The ignition key is the only "switch"
1. Turn the ignition switch to the ON position. Do notstart the engine.2. Fully depress the accelerator pedal, slowly, three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.1. Turn the ignition switch to the ON position. Do notstart the engine.2. Fully depress the accelerator pedal, slowly, three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.
This may sound ridiculous... but force the the ignition switch until the detent "breaks" and you can turn the ignition switch without the key. The risk here is that you could possibly break the assembly that the ignition switch inserts into. If you can get the switch to rotate from the lock position one position clockwise, then you can release the switch from underneath the steering column and pull the switch out. The alternative is to have a locksmith get the ignition switch to rotate one position clockwise and then you can remove the switch and replace it with a new one from any auto parts store.