it will still pass inspection but it is better to buy the fog lamps
Fog lights use special brackets which sit recessed on a 2001 Chevy Cavaliers bumper. To install the fog lights mount the units into the bumper brackets. Then splice the fog lights into the existing wire harness. Use a switch if necessary.
Yes, but there will a much bigger gap between the bumper and the headlights than there was with the stock bumper. Additionally, when equipped with fog lights, the 01-02 bumper had different fog lights, so your new bumper may not come the new ones, meaning you'll have to either find a pair, or live with two great big holes in your bumper, that is of course assuming that the new bumper had fog lights.
The rear fog lights are accessable from under the car. You have to reach up and under the rear bumper.
for the tail lights all the other lights are working blanking lights brake lights and reverse lights but no tail lights on both side
It is clipped to the back of the front bumper, either to the edge of the centre grille, or to near to the fog light opening, dependant upon the bumper type. It is clipped to the back of the front bumper, either to the edge of the centre grille, or to near to the fog light opening, dependant upon the bumper type.
The fog lights are turned on by pressing the fog light button on the headlight switch. On my truck, you have to pull the switch out that turns the regular lights on.
fog lights are located on the bottom of the front bumper and help the driver see when driviing through fog. cause the light passes under the fog rather than through it. so you can see the road.
If the aftermarket lights are not a factory option then the lights will need to be drilled into the bumper. Afterwards the lights will also need to be properly spliced into the existed wire harness.
Wrong! It does. Open the cover for the fog lights on you bumper and you will notice a yellow h11 female adapter. There is one on each side and that is where you will be plugging your lights into. By manually turning your lights on you can turn these fog lights on, or just use the switch that came with it. * I have a 2007 Camry Le and I installed fog lights.
The front impact sensors are mounted behind the fog lights. If you do not have fog lights, just look through the fog light position in the front bumper.
eh, the bumper? turn on the fog lamp switch and look to see what lights came on... common sense isn't so common I guess???
YES. The harness is behind the bumper in proximity of the location of the lights.