Want this question answered?
Attractors of Hopfield network can be considered as digital presentation of analog inputs. Every analog input is classified as "hear" to some of attractors, so attractor (which is vector, including binary output of neurons) is digital conversion if analog input (vector, including input signals of neurons.
A: A VOM digital requires to have a ADC analogue to digital converter whereby the analogue input will be displayed as number representation. An analogue meter all it requires is to have is current flow through it.
Digital converters are used to convert an analog input into a digital current. They also have converters that covert from digital to analog. These are used for older model TVs that need to take a newer digital technology input but the tv still requires analog.
digital pen is an input device
an input.
Digital voltmeter has high input impedence.
Input
A digital camera is an input device because it captures information and stores it on the device via the memory card(which is a storage device).
Input.
Speakers are analog devices. There is no cable and connector that will connect a digital audio jack to a speaker without a digital to analog conversion and an amplifier. If the audio output is digital, you will need a compatible amplifier that has the same digital input. Then you will need to link the amplifier to the speaker with exterior grade cable.
A digital input (in the form of a number) is converted into analog format, which could be a voltage or a signal frequency, for example. An example, which most people would be familiar with, is your touch tone phone. When you press a key on the phone, that is a digital input. The output is actually 2 frequencies mixed together (analog signal). Each row of keys on your phone is associated with a frequency, and then each column of keys is associated with a frequency. The two frequencies combined represent the row and column of the key that was pressed. At the phone company, they use analog filters to determine what frequencies were generated by your phone, and from that, determine which key was pressed (this is Analog to Digital conversion).
Type conversion operations are mainly used for specified output for the program. Eg: the input is two float values in addition, but the output needed is an integer In this case we need the type conversion operation done for the program to get an integer value else the output will be float value.