Voltage is the potential difference between the source & any point in the circuit. The forward voltage is the voltage drop across the diode if the voltage at the anode is more positive than the voltage at the cathode (if you connect + to the anode). Voltage drop means, amount of voltage by which voltage across load resistor is less then the source voltage.
we use Capital letters for the High Voltage ( Primary ) and we use small letters for Low voltage secondary so in this case: YN: it's refer to High Voltage, and it means the high voltage connection is Star and Neutral is Brought out. d: refer to Low Voltage and it means that low voltage connection is delta. 11: mean LV lead the HV by 30 degree. and others number it will be like bellow 01 02 03 04 05 06 07 08 09 10 11 12 30 60 90 120 150 180 210 240 270 300 330 360 or 0
Voltage gain is the ratio of the output voltage of an amplifier to its input voltage.
Voltage amplitude is the maximum value of a voltage.
Knee voltage (cut in voltage) :-The forward voltage at which the current through the P-N Junction starts increasing rapidly is called as Cut in voltage or knee voltage Breakdown voltage :-It is the minimum reverse voltage at which the P-N Junction can conduct without damage to the current
122 Throttle position sensor voltage low you need to clean the body throttle only. just applay carbritor cleaner to it and you go
1*122=1222*122=2443*122=3664*122=4885*122=6106*122=7327*122=8548*122=9789*122=109810*122=1220...
122 = 122/1
5% of 122= 5% * 122= 0.05 * 122= 6.1
40 percent off 122.00 = 73.240% off of 122= 40% discount applied to 122= 122 - (40% * 122)= 122 - (0.40 * 122)= 122 - 48.8= 73.2
21 % of 122: (21 / 100) * 122 = 0.21 * 122 = 25.62
12200%122= 122 * 100%= 12200%
122
That is 122 inches "in a line."
You need only a single '1' to write 122, but 122 of them to count to 122.
2010-122 = 1888
-122 because 122 + (-122) = 0