Under cut: groove formed along the edges of welding bead, thereby reducing the thickness of base metal
Cracks: Discontinuity in the weld zone
Porosity: Holes in the weld metal caused by the entrapment of gas
Slag inclusion: An entrapment of slag or other foreign metal actually inside the weld metal
Lack of penetration: Lack of weld metal actually entering the parent
Lack of fusion: Lack of thorough and complete mixing between filler metal and base metal
You can find pretty much all welding defects in Mig welding. There are some that are morelikely to appear than others but that is depending on the gas and power range that is being applied. The defects are: porosity, incomplete penetration (mostly in case of short circuit transfer) undercut, excessive concavity/convexity (incorrect amperage/voltage ratio), cracks (cold and hot) incomplete fusion (wrong torch angles), cold lap.
When we are using the tig welder we getting welding defects on our blanks, but when using the plasma weld no defects are found
1. crack 2. spatter 3.distortion 4. haz 5 blow holes
The best method for detecting defects in welds is Magnetic Particle. You can also use Fluorescent penatrent, and x-ray but they can be time consuming and often unreliable.
About 7% of all congenital defects are caused by exposure to teratogens
10
O. J. V. Chapman has written: 'RR-PRODIGAL' -- subject(s): Nuclear pressure vessels, Testing, Defects, Materials, Welding
No, too early to tell.
roster welding
One type of welding is tube welding. Another type if mig welding.
SAW welding is a type of arc welding while ERW welding is spot or seam welding. SAW stand for submerged arc welding while ERW stands for electric resistance welding.
smaw welding is sheilded metal arc welding