Peripherals are computer components that are connected by wires.
traces or printed wiring
what is a node wire
series connected
it is called an electromagnet
red wire connected to live conductor of supply intake,while the white wire connected to neutral conductor or supply and the bare wire connected to the protective earthing of
On a 200 amp or any size service the ground wire is easily identified. Look in the distribution panel for the neutral bus bar. This is where the service neutral (white wire) is connected to the distribution panel. There you will see a bare copper wire connected to the same neutral bar. This is the ground wire that is connected to the ground rods out side of the house.
The blue wire is usually just an auxiliary wire. The blue wire does not need to be connected. Tape the end of the blue wire off.
It works with a connected wire and all the components inside a circuit.
When two or more electrical components are connected, what they form is usually called a device.
series connected
Two or more electrical components connected together is called a circuit. Depending on how components are connected, it is either an open circuit, closed circuit, or a short circuit.
Each component in a network connected by wires is called a terminal. Components in a network that are not connected by wires, such as in a shared Wi-Fi connection are also called terminals.
RJ11 Cable
it is called an electromagnet
It is called a trace.
No. An earth wire (commonly called a ground wire) has no current flowing through it. It is simply a wire connected to the ground to discharge electrical current in a circuit.
To prevent electrical charges generated by lighting from entering the home which can cause fire and damage components.
It registers the touches, called a bodycord and connects to a sensor on the weapon.
System Board constitutes of multiple components connected by Pathways called BUSES. (Three Types of BUSES are there: Address, Control & DATA)