Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an internet Protocol (IP) host with its IP address and other related configuration information such as the sub net mask and default gateway.
For any further detail, so you can visit this website:http://www.iyogibusiness.com
Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the subnet mask and default gateway. RFCs 2131 and 2132 define DHCP as an Internet Engineering Task Force (IETF) standard based on Bootstrap Protocol (BOOTP), a protocol with which DHCP shares many implementation details. DHCP allows hosts to obtain necessary TCP/IP configuration information from a DHCP server.
If you want to more further detail so you can visit this website:http://www.iyogibusiness.com DHCP (Dynamic Host Configuration Protocol) is a network protocol that enables a server to automatically assign an IP address to a computer.
DHCP (D)iscoverDHCP (O)fferDHCP (R)equestDHCP (A)ck
The port 67 and port 68 are used by DHCP and the DHCP clients.
dhcp has to be authorized
The use of a DHCP relay agent is an agent that relays DHCP between DHCP clients and DHCP servers on different IP networks. The DHCP relay agent is compliant with RFC 1542.
(DHCP) Dynamic host Configuration Protocol. The Default Port Number is: for DHCP client : 546 for DHCP server : 547
yes DHCP require the authorization of the dhcp server before IP addresses can be allocated because until we authorize DHCP server the network does not know who is the dhcp server for the subnet. The DHCP server broadcasts the information to all.
Those are the four phases of acquiring an IP address via DHCP. More information would be needed to indicate which of the 4 phases are being used at this point.
router (config)# ip dhcp servicerouter (dhcp-config)# ip dhcp pool router (dhcp-config)# network
DHCP Server can be a standalone server
Router is usually configured as a DHCP client for WAN (Internet) network and as a DHCP server for local network.
There can only be one DHCP server on a network. Two DHCP servers will conflict.
DHCP server port number 67 and 68.
dhcp give to other computer the ip address automatically.
DHCP server listens at 67 and responds at 68.
DHCP itself means Dynamic host control protocol... :)
DHCP client is active by default when TCP/IP is bound to an adapter. DHCP server needs to be installed and configured separately.
DHCP server configuration in /etc/dhcp/dhcpd.conf(FEDORA)or /etc/dhcpd.conf (RHEL).
DHCP uses the clients MAC address to determine the IP address a client receives.
DHCP stands for "Dynamic Host Configuration Protocol". In Dhcp service you have to first make a DHCP server now its Server duty to provide an IP Address to each PC connect to it via network
They use DHCP to assign IP Addresses to Devices such as Windows XP, Networking flashcards, OIt DHCP and BootP services, and connecting routers. The definition for DHCP is Dynamic Host Configuration Protocol.
The device is looking for a DHCP server to obtain a DHCP address.