E - Stands for Electrode 60 - 60,000 tensile strength. 1 - in all position welding can be done 0 - cellulose
6013 is a mild steel electrode that bridges the span between mild steel and medium steel. It has a lot of the characteristics of the 60s type electrode but with a thicker coating that doesn't spatter as much and can be used with either AC or DC Polarity. 60 equals 60,000 lbs tensile strength, 1 equals all position, 13 states basic coating type and denotes AC plus DC useage. The deposited bead has a thicker slag coating than 6010, 6011, 6012.
Almost all electrodes have a series of numbers to tell #1 what the tensile strength of the weld will be, #2 what electrical current to use, #3 what position/s it can be used in (ie: flat, vertical etc.) Ex. E - 7018. E = electrode, 70 = 70,000 lbs tensile strength, 1 = all positions, 18 = AC or DC reverse polarity current. (welding lead +)
Electrodes with too much moisture may lead to cracking or porosity.
AWS = American Welding Society -- E = Electrode -- 60 = 60,000 lbs tensile strength -- 1 = all position -- 12 (1 and 2 combined ) = DC Reverse Polarity
6010
yes
to make sure the moisture is out of the rod.
6010 is a high cellulose sodium based electrode, which can be used to weld carbon steel pipes.
6010 600000 psi, i =all position, 0 = ronze High charged iron electrode, it's about 246 mV
6010
use a xx1x electrode such as a 6010 or 7018. i like around 77-82 amps for a 6010. point the rod about 5 degrees down and do small circles up while watching your puddle to maintain a consistent bead. start your tie ins a half inch above where you finished then quickly work your way back down to tie in and continue your progress up.
6010 = 6000 + 10
E(SCE)-E(H)=241 mV @25°C SHE is a primary standard electrode bt SCE is secondary reference electrode use for more easier work than SHE & SCE,s potential also measured by taking SHE as reference electrode.
any electrode with the first two digits 60 are 60000 psi tensile strength ex a 7018 would have 70000 psi tensile strength
Examples: glass electrode, combined electrode, platinum electrode
The designation E6011 means: E=electrode 60=60,00p.s.i.tensile strength as deposited 1= all position 1=coating make up