P0129-BAROMETRIC PRESSURE OUT-OF-RANGE
What does obd code P0740 mean
plug a obd 2 code reader into your car and activate it.
A P0129 code on a 2009 Dodge Charger indicates a problem with the barometric pressure sensor or a related issue, typically related to insufficient intake air pressure. To fix this, first inspect the intake air system for any leaks or blockages, and check the wiring and connectors to the sensor for damage. If everything appears intact, consider replacing the barometric pressure sensor. Finally, clear the code and test drive the vehicle to see if the code returns.
OBD I, but for the most part, you can use OBD II
OBD code P0304 is Cylinder Four Misfire.
Obd-on board diagnostic. The port is the plug the scan tool or code reader connects to.
J1850 is not a trouble code. It is a protocol that the OBD-II system uses. Trouble codes will be represented by a P before the numbers
OBD I code 67 - Neutral Drive Switch Circuit Open ( key on , engine off )
OBD code P1127 mean Exhaust not warm enough.
Cylinder #1 misfire.
The code P0129 on a 2005 Dodge Magnum indicates that the Engine Control Module (ECM) has detected a problem with the Barometric Pressure (BARO) sensor or the input from the intake manifold pressure sensor. This code typically suggests that the atmospheric pressure reading is lower than expected, which can affect engine performance and efficiency. Common causes include a faulty BARO sensor, vacuum leaks, or issues with the wiring and connectors. It's advisable to diagnose the specific issue to ensure proper repairs.
What does a code 212 mean on a OBD 1 mustang