1-4 or 1-6 or 1-8 depending on your cylnders
Maybe, 95 windstar has a different plug for transmission shift and the netrual safety switch ,But the plug for the trans can be changed,also you must have both in front of you to compare.95-97 ,98-01,your trans is an AX4N and uses syn fluild,,the car computer makes the trans shift.95 is an AX4S,I think it will work but as always you will have things to deal with.
everywhere i have read says it is the yellow/green wire in the driver kick off the ecu plug.
1234 on top from front to back 1324coil
what the number of the fuse on window 95 windstar diver side
There are several wires that exit the ECU tied together to a single 20g wire to the CEL with no fuse.
the 3.8 covers just snap on and off
The cdi box is under the flywheel. Or trace the spark plug wire back from the plug find that end and you have found it.
locate unlock code on a 95 ford windstar
If you still can, just put the new cap and rotor on and install the plug wires the same way they are on your old cap.
Take the end of the spark plug wire that you just pulled off of the plug end, and put it back on to the plug after you have unthreaded it. It will easily hold the plug while you extract it from the hole.
Firing order 1-4-2-5-3-6 Cylinder Numbers: 1 2 3 4 5 6 (front of vehicle) Coil Pack numbering: 4 6 5 3 2 1 See "Related Links" for other resources
i have a 95 318 ti 1.8 liter i ran mine the same as the coil order...from front of motor to the back starts 1...2...3..4.. in order Go to your local parts store and ask for a printout of your firing order. It is free and easy to understand, complete with a diagram. Good luck.