0
Normal Pumper connection size is 5 inch STORZ connection.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What size and how much hose on fire truck?
Varies by type of truck, e.g., pumper, tender, tanker, hood-and-ladder, brush truck, etc.
What are the dimensions for a 6 inch fire hydrant concrete block?
The ones that I see are 2-3/8" thick and 6"x12" in size.
How much water do fire truck have?
Depends on the size and type. Some don't carry any at all, and must be fed from a hydrant or water tanker truck.
What is the basic hydraulic calculation for fire hydrant system?
A fire hydrant system consists of a network of pipes. Hydraulic calculations allow one to predict the flow and pressure at any particular point. Alternatively, it is a method of calculation to optimize the system by changing the pipe size or flow or pressure so that desired pressure or flow can be achieved at a particular point. Avijit Roy, Kolkata, India
What is the connection between femur bone and head size?
there is no connection between the size of your head and your femur bone
How much does a fire hydrant weigh?
It depends on age, brand, and model. Older hydrants (of standard size) are generally around 370-500ish pounds. There were some low-rise models that were as little as 100 pounds or so. Modern hydrants tend to be 800+ pounds.
Is there connection between head size and intelligence?
No.
What size is the sewer connection pipe supposed to be?
4"
What is an ips plumbing connection?
Iron Pipe Size
How can you tell what size a bouquet is on tamagotchi connection?
no bum
What is an IPS connection in plumbing?
Iron Pipe Size
What is a normal operating pressure of a fire hydrant at the nozzle when operational?
It varies. I have seen a range of between 50 psi to 225 psi. It is affected by distance, size of water lines and their configuration and elevation change from source to the hydrant, as well as the type of pressurization, gravity or pump. On average though 80 to 100 psi. Of course a larger nozzle would decrease the residual pressure while a smaller nozzle would tend to increase residual pressure. 125 psi is about the maximum pressure for a "hand line" in order to be manageable.
