0.041 (in)
From the Haynes Acura Integra Repair Manual, 156 in-lbs.
.044
.44
1995 Acura Integra probably doesn't have a distributor, it would have coil packs, follow your spark plug wires from the spark plugs back. where the spark plug wires stop that's what has taken the place of your distributor. Its computer controlled the computer is probably under the dash on the passenger side of the car
1 3 4 2 clockwise from bottom left
The first spark plug on a 1991 Acura Integra is located at the front of the engine, typically on the driver's side, near the timing belt cover. The Integra features a four-cylinder engine, and the spark plugs are arranged in a straight line in the cylinder head. To access the first spark plug, you may need to remove the ignition coil or other components that obstruct access. Always refer to the vehicle's service manual for specific details and torque specifications when replacing spark plugs.
Unplug all the spark plug wires. then loosen the screws holding the distributor on, remove it, put the new one on and screw it in, then replace the spark plug wires
The 2000 Acura Integra OBD 2 port is under passenger dash
The spark plug gap for a 2001 Acura Integra typically falls between 0.040 to 0.044 inches (1.0 to 1.1 mm). It's important to check the owner's manual or verify with the manufacturer for the exact specifications, as they can vary based on the engine type and any modifications. Proper gap settings ensure optimal engine performance and fuel efficiency.
may be many things , spark plugs, spark plug cables , distrubuor , gas , alternator not charging the battery or a bad battery maybe evn gas - *PhAZe II* -
0.51
.040"-.045"?